It should have 20 MHz bandwidth, but, yes, the exact cut will be important.
They have one for 430-450 MHz. The one I have here says "SRL307*5" and lists
"430-450 MHz" on the sticker. The replacement model number shows the same thing
in their catalog.
Chuck
WB2EDV
----- Original Message -----
From: John J. Riddell
To: Repeater-Builder@yahoogroups.com
Sent: Monday, March 30, 2009 11:42 AM
Subject: Re: [Repeater-Builder] Need supplier for UHF welded yagi
Gran K6RIF was asking about sturdy antenna's and my suggestion was
to check on the Sinclair models.
As I recall the SRL307 has a bandwidth of + or - 2.5% so it would be
important to know what freq. your antenna's were cut for (ie Center
frequency.)
73 John VE3AMZ
----- Original Message -----
From: Gary Schafer
To: Repeater-Builder@yahoogroups.com
Sent: Monday, March 30, 2009 11:12 AM
Subject: RE: [Repeater-Builder] Need supplier for UHF welded yagi
Not sure who is looking for the yagi antenna but I have three NOS Sinclair
SRL307 antennas still in the box. All elements are welded.
