Mike
PDT Time
Bob
----- Original Message -----
From: Bob
To: [email protected]
Sent: Wednesday, April 22, 2009 7:21 PM
Subject: Re: [Repeater-Builder] MSF 5000 CXB
Hi Mike
Could you gave me a call
509 844 1954. Best time is from 5:30 PM to 9:00 PM M/F weekends all day.
Thanks
Bob
----- Original Message -----
From: Mike Mullarkey
To: [email protected]
Sent: Wednesday, April 22, 2009 6:17 PM
Subject: RE: [Repeater-Builder] MSF 5000 CXB
Bob,
I have a test set if you need one.
Mike
Colorado Telecom, L.L.C
Mike Mullarkey
6886 Sage Ave
Firestone, Co 80504
303-954-9695 Home
303-954-9693 Home Office & Fax
303-718-8052 Cellular
----------------------------------------------------------------------------
From: [email protected]
[mailto:[email protected]] On Behalf Of Bob
Sent: Wednesday, April 22, 2009 6:49 PM
To: [email protected]
Subject: Re: [Repeater-Builder] MSF 5000 CXB
Please I need some help here.
Thanks
Bob
----- Original Message -----
From: Bob Luttrull
To: [email protected]
Sent: Monday, April 20, 2009 8:56 PM
Subject: [Repeater-Builder] MSF 5000 CXB
Hi All
I have 2 MSF 5000 CXBs and one of them is gaving me a littler trable.
It is a UHF on 444.300. I nodest about 2 weeks ago that it was not keying
up and I did not have time to go look at it tell last Sunday. All the lights
were on like the RX LOCK and TX lock were on. But when you key the repeater up
the PA Full, PA on, and PA Key would just blink and it would not TX. I unpluge
it for the week and check it on Sunday and it work good for about 30 to 45 min
and swr was good. Then it started to do it again. The 3 lights would blink when
you keyed it up. I have check the cables and they look ok but I would like to
replace them but I can not find what tipe of cable they are. I do not have a
manual for them. I think it is in one of the cables from the RF tray to the
duplexer. Can anyone help please.
Thanks
Bob
kd7ikz
