Ron, 



Telewave makes the ANT 150 and 450 series antennas. We have mounted the UHF to 
the back side 180deg from the VHF using schedule 80 2 1/2 od aluminum pipe. You 
will want to top and bottom support the mast due to the length of it but works 
really well. If you want to use a coupler get a TX/RX splitter and will last 
years but you will need two of them if you plan to use one coax. 



Mike K7pfj 


----- Original Message ----- 
From: "rwjohn49" <[email protected]> 
To: [email protected] 
Sent: Tuesday, May 19, 2009 9:49:27 AM GMT -07:00 US/Canada Mountain 
Subject: [Repeater-Builder] Repeater Antenna 








Hey Folks, 

I have two repeaters here on two and 440.... Problem is I have to run one 
antenna for both...so, dual band antennas work fine...problem is even the heavy 
duty version (x510) of Diamond and the best Comet have failed... Am running 70 
watts on two and 60 watts on 440.... In each case the capacitors fail.....am 
tired of climbing up the tower.... Any ideas on a better dual band that will 
not fail.. Pulling my hair out. 

ron 


Reply via email to