Wonder if anyone has had this problem and know what the problem is. I am
working on a GE Exec II repeater (converted mobile) which has no Comb no. I
any case the issue is that if I move around the cable feeding it with a
generator I was seeing a change in the recieve.
I went directly to the RCA jack, and then found that just making
connection with the center pin, I have about 10 to 20db stronger recieved
signal than when I push it all the way in making the ground connection.
This is a mobile and the RF deck is no. is 19D417075G14 rev A covered by
LBI30032E. This shows a option of either non floating ground or floating ground
input. This one is a non floating ground one. Might have been changed but I
have know knowledge of its history.
The RCA jack center pin connects directly with a wire thru a hole to the
first helical and I have looked and can see no connection issues and measures a
short with an ohm meter. I even reheated the solder joints and no change.
Anythoughts would be appreciated.
Randy
