Yes but if the code plug versions are different it may not work. You may have to read and rewrite if that is the case. The clone icon if I remember is on the top pf the software window. These are not simple to program. There is no software manual except F1 key. Mot. Assumes this is used by an experienced dealer.
Alan Sent from my Verizon Wireless BlackBerry -----Original Message----- From: "Ralph S. Turk" <w7...@comcast.net> Date: Sat, 30 May 2009 15:46:46 To: <Repeater-Builder@yahoogroups.com> Subject: Re: [Repeater-Builder] Motorola CDM 1250 Is there a method to clone from one radio to the other? ----- Original Message ----- From: wa...@earthlink.net To: Repeater-Builder@yahoogroups.com Sent: Saturday, May 30, 2009 8:36:37 AM GMT -07:00 U.S. Mountain Time (Arizona) Subject: Re: [Repeater-Builder] Motorola CDM 1250 You have to set your zone first to establish how many channels are in the zone then you can program frrqs for each zone. Sent from my Verizon Wireless BlackBerry From : "Ralph S. Turk" Date : Sat, 30 May 2009 15:11:05 +0000 (UTC) To : <Repeater-Builder@yahoogroups.com> Subject : [Repeater-Builder] Motorola CDM 1250 Good morning All I have several CDM 1250's that need programing. I received every thing with the CDM's. Service manuals Programing Software Programing cable Rib etc The only thing I did not receive was the instructions for using the software. Software fires up fine and I have been able to program 1 channel into a 64 channel radio. I have tried to add other channels to no avail. The information shows up in the tree display and when I tell it to write to the radio, software indicates that it has loaded the channels but the CDM display only shows the first channel. What am I doing wrong? Ralph, W7HSG