Ralph, After you have programmed the personalities you want, then go down to the personalities assignment to zone. Click on the right-hand column heading. Right-click again and again on the first entry there, until you have added enough lines to insert your personalities. Then on each line, click the drop-down arrow and select which personality you want in that position. All of this information is in the tutorial on the CD.
73, Eric Lemmon WB6FLY -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Ralph S. Turk Sent: Saturday, May 30, 2009 8:11 AM To: [email protected] Subject: [Repeater-Builder] Motorola CDM 1250 Good morning All I have several CDM 1250's that need programing. I received every thing with the CDM's. Service manuals Programing Software Programing cable Rib etc The only thing I did not receive was the instructions for using the software. Software fires up fine and I have been able to program 1 channel into a 64 channel radio. I have tried to add other channels to no avail. The information shows up in the tree display and when I tell it to write to the radio, software indicates that it has loaded the channels but the CDM display only shows the first channel. What am I doing wrong? Ralph, W7HSG
