Its called add conventional personalities to zone. If you are in conventional mode. If operating LTR then you would set a zone for LTR and within you would set those parameters for that particular system.
Alan Sent from my Verizon Wireless BlackBerry -----Original Message----- From: "Ralph S. Turk" <w7...@comcast.net> Date: Sat, 30 May 2009 16:32:52 To: <Repeater-Builder@yahoogroups.com> Subject: Re: [Repeater-Builder] Motorola CDM 1250 I can not find where I set the zone/channels. ----- Original Message ----- From: wa...@earthlink.net To: Repeater-Builder@yahoogroups.com Sent: Saturday, May 30, 2009 8:36:37 AM GMT -07:00 U.S. Mountain Time (Arizona) Subject: Re: [Repeater-Builder] Motorola CDM 1250 You have to set your zone first to establish how many channels are in the zone then you can program frrqs for each zone. Sent from my Verizon Wireless BlackBerry From : "Ralph S. Turk" Date : Sat, 30 May 2009 15:11:05 +0000 (UTC) To : <Repeater-Builder@yahoogroups.com> Subject : [Repeater-Builder] Motorola CDM 1250 Good morning All I have several CDM 1250's that need programing. I received every thing with the CDM's. Service manuals Programing Software Programing cable Rib etc The only thing I did not receive was the instructions for using the software. Software fires up fine and I have been able to program 1 channel into a 64 channel radio. I have tried to add other channels to no avail. The information shows up in the tree display and when I tell it to write to the radio, software indicates that it has loaded the channels but the CDM display only shows the first channel. What am I doing wrong? Ralph, W7HSG
