I did the mod in the manual with the jumpers, I have pin 5 hooked up for the COR. I see no change in voltage when I open the squelch on pin 5. Any other ideas?
--- On Fri, 8/28/09, [email protected] <[email protected]> wrote: From: [email protected] <[email protected]> Subject: Re: [Repeater-Builder] Yaesu 5200 dual band To: [email protected] Date: Friday, August 28, 2009, 8:29 PM At 8/28/2009 15:28, you wrote: >I am trying to use a Yaesu 5200 rig for a remote base- link radio on my >repeater with a CAT 400 controller. I can not get the repeater to key from >the link radio. Does anyone know how to get COR from the yaesu 5200. >Thanks for any help Chet AA8CC It probably needs to be modified (installing 2 jumpers in the control head). Download the FT-5200 manual via a Google search for "FT-5200" & "manual", then see p. 37. You might check pin 5 of the mic connector for a COS signal in case someone already performed the mod. on the radio. Bob NO6B
