Bingo... polarity jumper. Thanks much!
--- In [email protected], DCFluX <dcf...@...> wrote: > > In that case make sure the COR polarity jumper on the DL-1000 is on > the right setting and that the cable between the controller and the > board is installed correctly. > > Also you may try installing the jumper back on J5 if you have bad delay board. > > On Sat, Aug 29, 2009 at 4:35 PM, n4zkf<n4...@...> wrote: > > I have the DL-1000C Audio delay board installed and had Note 11 with me at > > the time. But thanks for the advise. >
