We've encountered this issue between Motorola infrastructure and non-Motorola subscriber units... I believe at the last Daniels Electronics seminar I attended, it had something to do with the consoles fitting the correct status bits for P25 for basic functions, however, the majority of the features that weren't working on the non-Motorola radios were Motorola-specific non-standard status bits being sent from the console. The solution for this was to not use those proprietary functions of the console :(
On Tue, Sep 8, 2009 at 11:22 AM, Andrew Seybold <[email protected]>wrote: > > > Will—have not seen the problem but if you cannot find a solution I can > put you in touch with the right people at Ma/COM, now Harris. > > > > Andy > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *[email protected] > *Sent:* Tuesday, September 08, 2009 10:16 AM > *To:* [email protected] > *Subject:* [Repeater-Builder] P25 Problem > > > > > > Trying to help a friend with a problem: > > > > Working on a P25 High Band trunking system. > > > > Infrastructure is MA/COM. > > > > Subscriber units are a mix; EF Johnson, Motorola, and MA/COM. > > > > Problem: > > > > When an emergency is cleared from the console > > > > only the MA/COM radios are automatically cleared. > > > > The Motorola and Johnson radios have to be cleared individually at the > radio. > > > > Anybody dealt with this type of problem? > > > > Thanks, > > > > Will > > > > >
