Another good source is the RF Connection, www.therfc.com. You can get the RG-400 or RG-142 cables with N-male/female or Mini UHF connectors. They are really high quality.
On Mon, Oct 26, 2009 at 7:19 AM, Maire-Radios <[email protected]>wrote: > > > *we get all of ours from Tessco.* > ** > > > ----- Original Message ----- > *From:* DCFluX <[email protected]> > *To:* [email protected] > *Sent:* Sunday, October 25, 2009 11:30 PM > *Subject:* Re: [Repeater-Builder] Double Shielded Cable > > > > I just did that as well, nice cables, but it looks like they use lead free > solder. > > Pasternack makes cables, but they have $100 minimum order, which isn't that > hard to meet as they are typically 3-6dB more than their competitors. > > On Sun, Oct 25, 2009 at 8:20 PM, Pointman <[email protected]> wrote: > >> >> >> AI just bought several pre-made connectors from Advanced Receiver >> Research...but I'm sure you can buy the raw cable and make up your own, as >> well. >> >> de KM3W >> >> --- On *Sun, 10/25/09, kc8fwd <[email protected]>* wrote: >> >> >> From: kc8fwd <[email protected]> >> Subject: [Repeater-Builder] Double Shielded Cable >> To: [email protected] >> Date: Sunday, October 25, 2009, 11:17 PM >> >> >> >> >> Hello, >> What is a good source to get Double Shielded Cable with N connectors to go >> from the duplexer to receiver and duplexer to transmitter? >> What kind of coax etc.All info is appreciated Thanke Mike KC8FWD >> >> >> >> >> > > -- James Adkins, KB0NHX Vice-President -- Nixa Amateur Radio Club, Inc. (KC0LUN) Southern Missouri Frequency Coordinator - Missouri Repeater Council www.nixahams.net The Nixa Amateur Radio Club - "There is no charge for awesomeness!" (Well, only $1.00 per month)
