I am pretty sure there is already a firmware fix for this in dealer tools. We had a customer buy 3 new tkr-850's. He otherwise had mostly moto portables. When he heard the sql crash, he wanted it either fixed or his old repeaters back (2 unidens and a standard). We got on the phone with tech support and had firmware in moments...
----- Original Message ----- From: [email protected] <[email protected]> To: [email protected] <[email protected]> Sent: Sat Dec 12 08:01:20 2009 Subject: Re: [Repeater-Builder] RE: 50 Watt Repeater Paul, It depends on what portables you are using with the Kenwood repeater. Some, but not all of the newer CPS programmed equipment have a setting checkbox marked something like "Use non-standard PL decode" which can be set on a per channel basis. With this feature enabled the squelch crash issue goes away. I have seen this on the HT750/1250/1550 and CDM products. If the portables are older then you either have to live with the crash or you can have a dealer contact Kenwood about changing the timing in firmware (not a cheap option). Milt N3LTQ Quoting Paul Dumdie <[email protected] <mailto:w9dwp%40sbcglobal.net> >: > I have a TKR-750 repeater and like it. My only issue is that I use Motorola > Portables and keep getting a squelch crash. What have you guys > setting the setting for the reverse burst at to get rid of the > squelch crash? > > Thanks! > > > Paul R. Dumdie Jr. "73" > W9DWP/R IRLP-NODE-4455 > 443.025/2A 145.270/1B/1Z/NAC-293 > ARC-Radio-8 KCARES KCAPS > HERD546 EX WB9QWZ > WQGG738-462.725 AAR5CU/T > www.riflesandradios.com > www.theherd.com > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > >
