this is just an excersize on paper as to how it would be implemented in the CB band.
it is not for actually building. It is just to pass along to CB'ers who ask me how one would go about building a CB repeater. i would say 99.9% would see the complexities and not bother. but at least now i can explain how it would work the next time such a question arrises. I don't have the cash the resources or the real estate to implement such a setup. I am in the US and well aware of the legallities as well as the reallity that the FCC has all but given up on CB. but to the original question. yes Tx on 31 Rx on 1. back in Jersey 31 was the local get together channel so i used it in my example. ----- Original Message ----- From: "Pointman" <[email protected]> To: <[email protected]> Sent: Friday, February 12, 2010 8:07 PM Subject: Re: [Repeater-Builder] Re: 11m Repeater Let me get this right...you are txing on channel 31 and rxing on Channel 1 in the CB band? You are not in the US I assume. ________________________________ From: i recycle computers <[email protected]> To: [email protected] Sent: Fri, February 12, 2010 1:21:11 PM Subject: Re: [Repeater-Builder] Re: 11m Repeater but for a multiple recieve site setup using a voter as others have pointed out won't work very well with RF links. ----- Original Message ----- From: "Steve" <steve.m1swb@ tiscali.co. uk> To: <Repeater-Builder@ yahoogroups. com> Sent: Friday, February 12, 2010 12:13 PM Subject: Re: [Repeater-Builder] Re: 11m Repeater > Hi > > Why not use a uhf link ?, cheaper than a phone line and > probably more reliable. 27Mhz, is in the cb band, isn't it > > Steve > ----- Original Message ----- > From: "i recycle computers" <kc8...@hotmail. com> > To: <Repeater-Builder@ yahoogroups. com> > Sent: Friday, February 12, 2010 6:05 PM > Subject: [Repeater-Builder] Re: 11m Repeater > > >> here is my thought on how to implement this... >> >> TX site: >> Feq: 27.315 >> TPO: 4 Watts >> Mode: AM >> Antenna: Custom Dual 4 Bay Folded Dipole >> Filter: Bp: 27.315 Br: 27.965 >> Coax: Andrew 1 Inch Hardline >> Controller: Rack Mount Custom Controller, and Receive Voter >> Transmitter: Cutom Built Crystal Controlled 4 Watt AM Transmitter >> >> Rx Site: >> Freq: 27.965 >> Mode: AM >> Antenna: Custom Dual 2 Bay Folded Dipole >> Filter: Bp: 27.965 Br: 27.315 >> PreAmp: Custom Built Single Freq. Tower Mounted Pre Amp. >> Receiver: Custom Built Crystal Controlled AM Receiver >> Coax: Andrew 1 inch hardline >> >> Tx/Rx Site Seperation: 1 Mile Minimum >> Tx/Rx site Linking: Telco Wireline >> >> Yes I put a lot of thought into it :) >> >> I come up with all these wacky idea's, but never get around to >> implementing >> them. >> >> Thanks, >> >> Rev. Robert P. Chrysafis >> >> I Recycle Computers >> >> "Saving UnWanted PC's From The Landfill One Computer At A Time :)" >> >> Listen To My Free Live Police Scanner Feed for Tuscaloosa / Northport >> http://www.radioreference.com/apps/audio/?feedId=3836 >> >> >> >> ------------ --------- --------- ------ >> >> >> >> Yahoo! Groups Links >> >> >> > > > > ------------ --------- --------- ------ > > > > Yahoo! Groups Links > > > >
