There are at least a couple of easy ways you can do this. First, you can program one wildcard output for "RX PL DETECT" and a second wildcard output for "RX CAR DET". Connect both of those to your external controller and let it decide when or if both are necessary.
A second method would be to program the Quantar for two channels - one with PL and one without. Program a single wildcard output for "RX QUAL MET" and connect that to your external controller as its COS. Then also program a wildcard input using the "CHN (X)" command so that an output from your external controller can be connected to that input and thus change the channel to turn PL on and off. Once you get up to speed on the Quantar wildcard programming I think you will find that you can make the Quantar do just about anything you can dream up. ---------------------------------------------------------------- --- In Repeater-Builder@yahoogroups.com, "surf_boy82" <surf_bo...@...> wrote: "... > We absolutely need the ability to switch between CSQ and PL modes. The controller we're using supports it... But I don't see how to program this thing to have separate outputs for COS and PL Detect. ..."
