There was, but it's all gone now. At one point a link to his site was posted on the Repeater Builder site. Joe made several posts to this list and became discouraged at the lack of interest. The documentation would be of no value as you need the programmed microprocessor chip to make it work.
Chuck WB2EDV ----- Original Message ----- From: "MCH" <m...@nb.net> To: <Repeater-Builder@yahoogroups.com> Sent: Monday, March 01, 2010 8:44 PM Subject: Re: [Repeater-Builder] Re: 900 meg Spectra radio > Interesting. I wonder if there is some tech info on this that is > available. Any idea how much the cost was and what mods were required? > > Or, perhaps some tech data on the synthesizer as far as what pins > control the frequency, as well as any binary-to-frequency info. > > Joe M. > > Chuck Kelsey wrote: >> >> >> Joe Burch was his name. It was a frequency agile control head that could >> be set up for most any type of synthesized commercial radio. You entered >> the frequency and tone via a keypad. >> >> Chuck >> WB2EDV >> >> ----- Original Message ----- >> *From:* Chuck Kelsey <mailto:wb2...@roadrunner.com> >> *To:* Repeater-Builder@yahoogroups.com >> <mailto:Repeater-Builder@yahoogroups.com> >> *Sent:* Monday, March 01, 2010 8:20 PM >> *Subject:* Re: [Repeater-Builder] Re: 900 meg Spectra radio >> >> Been there, done that. There was no interest in the ham community. >> Why? It required modifications that most were not willing to tackle. >> At the moment, the name of the guy escapes me, but I did one of his >> modifications to a 6-meter Delta-S several years ago. He has since >> given up on the idea, but it worked on most any radio. >> >> Chuck >> WB2EDV > > > ------------------------------------ > > > > Yahoo! Groups Links > > > -------------------------------------------------------------------------------- No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.733 / Virus Database: 271.1.1/2717 - Release Date: 03/01/10 14:34:00
