Try this Force the repeater transmitter on.
Walk around with a hand held that has a CW mode, such as a TH-F6A tuned to the repeaters input frequency and get a detailed map of the area and note the S meter readings.
- [Repeater-Builder] Interference from local 600 kHz rad... lpcoates
- Re: [Repeater-Builder] Interference from local 60... DCFluX
- Re: [Repeater-Builder] Interference from local 60... Joe
- Re: [Repeater-Builder] Interference from loca... Bruce Coates
- RE: [Repeater-Builder] Interference from ... Mike Besemer (WM4B)
- [Repeater-Builder] COR signal from ICOM 3... Robert McNeill
- Re: [Repeater-Builder] COR signal from IC... DCFluX
- RE: [Repeater-Builder] COR signal fro... Robert McNeill
- [Repeater-Builder] Re: Interference from local 60... Geoff Booth
- Re: [Repeater-Builder] Re: Interference from ... DCFluX
