What radios are you using? and NO you dontwant the PA option on a repeater. Assuming your using either Maxtrac or Radius series.!!!!!!!
--- On Fri, 6/11/10, Ian Wells <[email protected]> wrote: From: Ian Wells <[email protected]> Subject: RE: [Repeater-Builder] kyodo kg108 uhf To: [email protected] Date: Friday, June 11, 2010, 8:27 PM Found the problem .I needed to select the ctcss/dcs option .reading ok and programed ok .by the way how do we convert the radio to repeater .I found the mic and ptt on it but I carn't seem to locate the ctcss decode line so when it receives a ctcss signal it controls a line voltage .do we use the horn decode and program the option ? Thank You ,Ian Wells Kerinvale Comaudio, 3A Murchison Street, Biloela.4715 Ph 0749922449 Mb 0409159932 Hm 0749922574 Fx 0749922767 www.kerinvalecomaud io.com.au -------Original Message----- -- From: kerincom Date: 12/06/2010 7:16:53 AM To: mail=Repeater- buil...@yahoogro ups.com Subject: RE: [Repeater-Builder] kyodo kg108 uhf It is used specially for radio programming and has worked ok with other software .what would be the best com port settings to have Thank You, Ian Wells, Kerinvale Comaudio, 3A Murchison Street,Biloela. 4715 Ph 0749922449 or 0409159932 or 0749922574 www.kerinvalecomaud io.com.au -------Original Message----- -- From: Ross Johnson Date: 06/12/10 05:37:52 To: Repeater-Builder@ yahoogroups. com Subject: RE: [Repeater-Builder] kyodo kg108 uhf You know that com port works? Older machines serial ports were poorly or not even buffered sometimes. Also if this is a programming laptop, where you use it to program other radios, make sure none of the other programming software is tying up that com port while the machine is running. Ross kc7rjk -----Original Message----- From: Repeater-Builder@ yahoogroups. com [mailto:Repeater- buil...@yahoogro ups.com] On Behalf Of kerincom Sent: Friday, June 11, 2010 7:49 AM To: mail=Repeater- buil...@yahoogro ups.com Subject: Re: [Repeater-Builder] kyodo kg108 uhf Already done that Thank You, Ian Wells, Kerinvale Comaudio, 3A Murchison Street,Biloela. 4715 Ph 0749922449 or 0409159932 or 0749922574 www.kerinvalecomaud io.com.au -------Original Message----- -- From: wd8chl Date: 06/11/10 23:30:03 To: Repeater-Builder@ yahoogroups. com Subject: Re: [Repeater-Builder] kyodo kg108 uhf On 6/11/2010 7:45 AM, kerincom wrote: > > > Hi guys .I have the genuine software and programming cable and kg108 uhf > radios and I am trying to read and program them .The software is installed > on a Toshiba 700mhnz laptop running win98se .and when I try to communicate > with the radio it comes up with error in communications .I have tried > running it in dos and still the same .It seems to be a com error because I > have 2 programming cables and the get the same result with both.Can anyone > suggest anything I'm not familiar with those, but chances are if they are more than 6-8 years old, the software is DOS, and Windows won't allow control of the RS-232 port the way it wants. Hit the 'Start' button, and in the shutdown menu, one selection will be "Restart in MS-DOS mode." Select that, and it will take you to a true DOS environment. You'll have to navigate back to the directory you have your program in from there using DOS commands. Jim
