Kenneth,
Can you elaborate on the programming piece? I'm hung up on the fact that to program the CAT-1000 via serial port, you've got to first activate the CAT-1000 serial port via the DIP switch. (I'm thinking there may be a DTMF command to activate the serial port as well, but don't have my manual handy.) 73, Mike WM4B _____ From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Kenneth Cook Sent: Thursday, July 08, 2010 11:52 PM To: Repeater-Builder@yahoogroups.com Subject: RE: [Repeater-Builder] Repeater Control Operator via Other-Than-Phone-Line Mike, I use the internet to my repeater site to control everything. Including the AC, Heating, Packet, Alarm System, and controlling/programming the two CAT-1000s on the VHF and UHF repeaters. I am planning on adding IRLP as well as video feeds at the site. I use a program called VNC2. It is the free version and works very well for me. Kenneth Cook, W8DZN 5726 Timpson Rd. Caledonia, Ohio 43314 ARRL VE, ARRL Registered, Certified Instructor/Examiner for ECOMM Levels I, II and III IS-22, IS-100, IS-120A, IS-200, IS700, IS-800 and IS -802 Certified. W8DZN Repeaters in Bucyrus, Ohio Repeaters 147.165 PL88.5 & 442.525 PL88.5 _____ From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Mike Besemer (WM4B) Sent: Thursday, July 08, 2010 10:32 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Repeater Control Operator via Other-Than-Phone-Line At our club meeting tonight a discussion came up regarding the cost of the phone line to our 2-meter repeater system. Originally it was there for the Autopatch, but has evolved to being primarily used for me to program the controller (CAT-1000) and to control the system. (The autopatch is rarely used, since everyone carries a cellphone now.) Everyone understands that the phone line is needed for control and programming, but we started toying with other ideas. Specifically, having an Internet connection at the site seemed like it had a lot of potential, but frankly I don't know why! It'd be nice to run an I-Gate from that location (we already have an APRS weather node there), but it's not essential. I could probably use it to monitor the site as well, but that's not really much of a concern either. So, the question is, how can we use Internet to control/program the CAT-1000? We could get Internet at the site for about the same cost as the phone, and if we could use it for repeater control/programming AND the other things I mentioned, it'd be a better deal. Can IRLP be used for control/programming? I'm not familiar with that system whatsoever, but am always willing to learn. 73, Mike WM4B
