George, sent the money. It will come from a different e-mail address, but it will have my name.
Jeff, KB1SPH / WQEX694 -------------------------------------------------- From: "George Henry" <ka3...@att.net> Sent: Tuesday, July 13, 2010 1:49 PM To: <Repeater-Builder@yahoogroups.com> Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements > I'm only looking to recoup what I have invested in them... $50 for the > pair. > At the moment, I have lots of spares, but sure, I'll take another set. > > If you do Paypal, you can pay me at ka3...@aol.com. > > George, KA3HSW > > >> >>From: Jeff Lavoie - KB1SPH/WQEX694 <kb1...@wqex694.info> >>To: Repeater-Builder@yahoogroups.com >>Sent: Mon, July 12, 2010 10:17:12 PM >>Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements >> >> >>Actually 462.600 is the frequency I'm currently running my Kenwood on. I >>would probably be putting the Motorola on the same frequency with a >>different PL at a different location. That would solve a lot of headaches >>if you're willing to part with them. I was thinking about doing ham later >>down the road if GMRS goes away, I'm sure you've all heard about the >>proposed rule changes. But until I hear that GMRS repeaters are not >>allowed >>(or must be narrow band) I'll be setting it up on GMRS. The Kenwood is >>more >>set up for a portable repeater for events right now. A group of us get >>together and help out with events when there aren't enough ham volunteers. >> >>Let me know what you want for the channel elements. If you're interested I >>would be willing to send you a set of channel elements back if you need >>them >>as spares. >> >>Jeff, KB1SPH / WQEX694 >> >>-------------------------------------------------- >>From: "George Henry" <ka3...@att.net> >>Sent: Monday, July 12, 2010 1:59 PM >>To: <Repeater-Builder@yahoogroups.com> >>Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements >> >>> What frequencies are you looking for? Ham or GMRS, I presume... I've got >>> a >>> bunch of MSR-2K elements if you need any, including a set for a 462.600 >>> GMRS >>> repeater. >>> >>> >>> >>> George, KA3HSW / WQGJ413 >>> >>> >>>> >>>>From: Jeff Lavoie - KB1SPH/WQEX694 <kb1...@wqex694.info> >>>>To: Repeater-Builder@yahoogroups.com >>>>Sent: Mon, July 12, 2010 1:15:28 AM >>>>Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements (and >>>>a >>>>guacamole recipe) >>>> >>>> >>>>Thanks Skipp, that helps a great deal. I've found a lot of usefule >>>>information on repeater-builder.com over the years, but I just finally >>>>signed up for the yahoo group yesterday, I don't know why I waited. >>>> >>>>Bomar sounds like a good place to start with. >>>> >>>>I got this MSR-2000 for $25 at a hamfest because the guy didn't want to >>>>load >>>>it up in his truck to take it back home. I was buying a Kenwood TKR-820 >>>>and >>>>he said, "I'll tell you what, I'll give you the pair for $50." How could >>>>I >>>>go wrong? The Kenwood is working great thanks to repeater-builder.com. >>>> >>>>On another note, I sent you a message a few days ago, but sometimes >>>>yahoo >>>>blocks my messages....not sure why. >>>> >>>>I was wondering if you had any information about a CSI-32 tone panel and >>>>possible firmware upgrades. The EPROM inside has a sticker on it that >>>>says >>>>the following. >>>> >>>>128 v4.0 >>>>6289 (I think, hard to read) >>>>© CSI >>>> >>>>- Jeff >>>> >>> > > > > ------------------------------------ > > > > Yahoo! Groups Links > > >
