Great! I'll dig them out first thing tomorrow & get them shipped out no later than Thursday.
George, KA3HSW / WQGJ413 ----- Original Message ----- From: "Jeff Lavoie - KB1SPH/WQEX694" <[email protected]> To: <[email protected]> Sent: Tuesday, July 13, 2010 10:24 PM Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements > George, sent the money. It will come from a different e-mail address, but > it will have my name. > > Jeff, KB1SPH / WQEX694 > > > -------------------------------------------------- > From: "George Henry" <[email protected]> > Sent: Tuesday, July 13, 2010 1:49 PM > To: <[email protected]> > Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements > >> I'm only looking to recoup what I have invested in them... $50 for the >> pair. >> At the moment, I have lots of spares, but sure, I'll take another set. >> >> If you do Paypal, you can pay me at [email protected]. >> >> George, KA3HSW >> >> >>> >>>From: Jeff Lavoie - KB1SPH/WQEX694 <[email protected]> >>>To: [email protected] >>>Sent: Mon, July 12, 2010 10:17:12 PM >>>Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements >>> >>> >>>Actually 462.600 is the frequency I'm currently running my Kenwood on. I >>>would probably be putting the Motorola on the same frequency with a >>>different PL at a different location. That would solve a lot of headaches >>>if you're willing to part with them. I was thinking about doing ham later >>>down the road if GMRS goes away, I'm sure you've all heard about the >>>proposed rule changes. But until I hear that GMRS repeaters are not >>>allowed >>>(or must be narrow band) I'll be setting it up on GMRS. The Kenwood is >>>more >>>set up for a portable repeater for events right now. A group of us get >>>together and help out with events when there aren't enough ham >>>volunteers. >>> >>>Let me know what you want for the channel elements. If you're interested >>>I >>>would be willing to send you a set of channel elements back if you need >>>them >>>as spares. >>> >>>Jeff, KB1SPH / WQEX694 >>> >>>-------------------------------------------------- >>>From: "George Henry" <[email protected]> >>>Sent: Monday, July 12, 2010 1:59 PM >>>To: <[email protected]> >>>Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements >>> >>>> What frequencies are you looking for? Ham or GMRS, I presume... I've >>>> got >>>> a >>>> bunch of MSR-2K elements if you need any, including a set for a 462.600 >>>> GMRS >>>> repeater. >>>> >>>> >>>> >>>> George, KA3HSW / WQGJ413 >>>> >>>> >>>>> >>>>>From: Jeff Lavoie - KB1SPH/WQEX694 <[email protected]> >>>>>To: [email protected] >>>>>Sent: Mon, July 12, 2010 1:15:28 AM >>>>>Subject: Re: [Repeater-Builder] Recrystal MSR-2000 Channel Elements >>>>>(and >>>>>a >>>>>guacamole recipe) >>>>> >>>>> >>>>>Thanks Skipp, that helps a great deal. I've found a lot of usefule >>>>>information on repeater-builder.com over the years, but I just finally >>>>>signed up for the yahoo group yesterday, I don't know why I waited. >>>>> >>>>>Bomar sounds like a good place to start with. >>>>> >>>>>I got this MSR-2000 for $25 at a hamfest because the guy didn't want to >>>>>load >>>>>it up in his truck to take it back home. I was buying a Kenwood TKR-820 >>>>>and >>>>>he said, "I'll tell you what, I'll give you the pair for $50." How >>>>>could >>>>>I >>>>>go wrong? The Kenwood is working great thanks to repeater-builder.com. >>>>> >>>>>On another note, I sent you a message a few days ago, but sometimes >>>>>yahoo >>>>>blocks my messages....not sure why. >>>>> >>>>>I was wondering if you had any information about a CSI-32 tone panel >>>>>and >>>>>possible firmware upgrades. The EPROM inside has a sticker on it that >>>>>says >>>>>the following. >>>>> >>>>>128 v4.0 >>>>>6289 (I think, hard to read) >>>>>© CSI >>>>> >>>>>- Jeff >>>>> >>>> >> >> >> >> ------------------------------------ >> >> >> >> Yahoo! Groups Links >> >> >> >
