Yes the repeater has CTCSS but I turn it off for testing. When on the CTCSS 
will false but that's not what I'm talking about when I say that the repeater 
sometimes keys up after the beginning of the page.  

I'm going to take another repeater which has a different 1st IF up and test 
with just as you suggest. It's a VXR-5000 with a 1st IF of 21.6 Mhz and a 2nd 
IF of 455. The current repeater (a Micor) has a 11.7 IF and is single 
conversion.

Yes, it happens out of the blue. I'm confident that the repeater TX is not part 
of the mix. 

The paging does sound a bit different. I've been think that's due to the wide 
dev (15 Khz plus) and that different receivers would hear that differently.

I talked to the tech and he told me the system has a satellite feed. He also 
told me the same feed goes to their transmitter on 929.0375 Mhz. Basically, 
there is one controller for both the 929.0375 and the 157.74 transmitters. They 
also have two other transmitters on 929.6375 and 931.6625.
--
Tim
:wq

On Aug 21, 2010, at 9:18 AM, Matthew Kaufman wrote:

> Tim Sawyer wrote:
>> 
>> 
>> It seems to pick up most of the page. Occasionally the beginning is 
>> missing or it will get just the very end. It always seems to drop at 
>> the same time as the page. 
>> 
> Does the repeater run CTCSS on the input? If so, is the behavior the 
> same if CTCSS is off? (CTCSS might clip the signal off at one end or the 
> other, even though the receiver is hearing the whole thing)
> 
> Can you hear the signal using a completely different receiver on the 
> same frequency at the site? (Preferably one that uses a different first 
> IF frequency, tests to see if it is getting into the IF or if the 
> intermod product is an image rather than the actual receive frequency)
> 
> Does it happen "out of the blue" with the repeater inactive, or only 
> when the repeater has been in-use? (Tests to see if the repeater 
> transmitter is part of the mix)
> 
> Does the paging sound exactly the same, or might you be hearing a link 
> transmitter? (many are on 72 MHz, exactly half your input frequency)
> 
> 
> Matthew Kaufman
> 
> 
> ------------------------------------
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 

Reply via email to