Metering with Digital and Analog Multi-Meters.
> Re: MSR-2000 Alignment Metering > Mike Morris <wa6i...@...> wrote: > I heard it on TV as "If it works it must be a Fluke". I was quoting a friend from my old days at Motor-head (Moto) Service. Don't know where he (Jeff) got it from... > Mine is a Fluke 73 type III. Should work fine on the MSR-2000 & Micor metering points. I normally use an original Fluke 77 or 85 model. Fluke DMM's have never really given me a false value although many brands of DMM's including a number of Fluke models do sometimes freak out when looking at certain reactive loads... like some transformer windings, when trying to measure the DC resistance, which is why I also keep a trusty low cost dumb as a rock Analog Movement Multi-Meter standing by. > What wording would you suggest? "Don't run with scissors" maybe? Advisory: Inexpensive lower cost Digital Multi-Meters can provide erratic or inaccurate meter test-point indications. > I wrote that the way I did because I have always had better > results with either a Moto test set or a analog VOM > (i.e. Simpson 260 or Triplett 630). > Mike Some of the fairly small value change metering-point measurements are a lot easier to identify with a Fluke (or any well designed) DMM using the milli-volt range position/scale. Especially during an initial from scratch default alignment. Your results should vary... cheers, s. >>Re: MSR-2000 Alignment Metering >> Probably looks a lot like the one at the top of the web page >> at <http://www.repeater-builder.com/msr2000/msr2000-index.html> >> There's an error on the above mentioned web page. >>> "In other words, YOU CANNOT USE A MODERN DVM TO PROPERLY >>> TUNE AN MSR2000." >> I don't agree, in fact it's much easier for me to use my >> Fluke DMM to detect some of the very small meter peaks and >> dips. There is no rule or requirement the metering points >> have to be loaded by a 50uA movement. >> Erratic metering with low cost Digital Multi Meters is >> probably the result of the price you paid. >>"If it's a good meter, it must be a Fluke". >>cheers, >>s.