Understood. IIRC, the MII could use a homebrew supply which provides ~13.6 VDC, so long as the voltage always stays high enough to keep the linear regulator on the 10V card in its happy zone, right?
----- Original Message ----- From: Jeff DePolo To: Repeater-Builder@yahoogroups.com Sent: Monday, August 30, 2010 3:53 PM Subject: RE: [Repeater-Builder] Running a Mastr II Repeater QRP > Also, I don't need anywhere near 100 watts... The driver is 40 watts, just bypass the final board. But if you're really trying to safe your landlord's electric bill, the ferro power supply is really what you should be eliminating...
