There is an RSS software solution ("bitbang") to get rid of the alarms.
Connect the RIB to the operating MSF.
>From the main menu hit ALT-F5. A command line bar will appear telling you to
>enter an IPCB command. Enter the following: (WITHOUT the " " quotes)
"/1e1607160800FF"
it is CASE sensitive. This sets the FWD/REV settings to zero and FF (infinity)
I've done it many times, and it works just fine!
--- On Sun, 8/29/10, jimmylpowell <[email protected]> wrote:
From: jimmylpowell <[email protected]>
Subject: [Repeater-Builder] Msf5000 Low Power alarms
To: [email protected]
Date: Sunday, August 29, 2010, 12:36 PM
I originally posted this on the MSF5000 board but got no response. I
thought I would broaden my search.
Does anyone know a way to get a non trunking MSF with out an internal
power
sensor to stop giving the 7 beeps? I have tried going back to a default
codeplug
and starting from scratch. This did not work. It seems that once the bit
is
set it won't go away. I'm sure that it happened when someone went into
the
screen to adjust the alarms. I know this is a common problem and they
tell you
not to do it.
I have the alarms disabled over the air, but it annoys me on the local
audio. I
would like to enable the over the air alarms, but I can't until I can
clear this
one.
My MSF has version 4.07 SSCB and 5.04 TTRC.
Maybe there's some bit banging that can be done.
Jimmy, K5JCT
