That did work. That's cool. Is there anyway to save it to the radio?
When I reset the radio the problem comes right back.
Thanks again.
Jimmy
On Fri, 2010-09-03 at 17:01 -0400, MCH wrote:
>
> How do you set it back to normal?
>
> Joe M.
>
> Richard Arnold wrote:
> >
> >
> > There is an RSS software solution ("bitbang") to get rid of the
> alarms.
> > Connect the RIB to the operating MSF.
> > From the main menu hit ALT-F5. A command line bar will appear
> telling
> > you to enter an IPCB command. Enter the following: (WITHOUT the " "
> quotes)
> >
> > "/1e1607160800FF"
> >
> > it is CASE sensitive. This sets the FWD/REV settings to zero and FF
> > (infinity)
> > I've done it many times, and it works just fine!
> >
> >
> > --- On *Sun, 8/29/10, jimmylpowell /<[email protected]>/* wrote:
> >
> >
> > From: jimmylpowell <[email protected]>
> > Subject: [Repeater-Builder] Msf5000 Low Power alarms
> > To: [email protected]
> > Date: Sunday, August 29, 2010, 12:36 PM
> >
> >
> >
> > I originally posted this on the MSF5000 board but got no response. I
> > thought I would broaden my search.
> >
> > Does anyone know a way to get a non trunking MSF with out an
> internal
> > power
> > sensor to stop giving the 7 beeps? I have tried going back to a
> default
> > codeplug
> > and starting from scratch. This did not work. It seems that once the
> bit
> > is
> > set it won't go away. I'm sure that it happened when someone went
> into
> > the
> > screen to adjust the alarms. I know this is a common problem and
> they
> > tell you
> > not to do it.
> >
> > I have the alarms disabled over the air, but it annoys me on the
> local
> > audio. I
> > would like to enable the over the air alarms, but I can't until I
> can
> > clear this
> > one.
> >
> > My MSF has version 4.07 SSCB and 5.04 TTRC.
> >
> > Maybe there's some bit banging that can be done.
> >
> > Jimmy, K5JCT
> >
> >
> >
> >
> >
> >
> >
> > ----------------------------------------------------------
> >
> >
> > Internal Virus Database is out of date.
> > Checked by AVG - www.avg.com
> > Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date:
> 03/14/10 03:33:00
> >
>
>
>
>
