Neither simple-bus bindings nor dtc W=1 accept device nodes in soc@ node
which do not have unit address. Therefore usethe address space
of child device (actual DWC3 Controller) as the wrapper's address to
fix:
exynos7-espresso.dtb: soc@0: usb: {'compatible': ['samsung,exynos7-dwusb3'],
...
should not be valid under {'type': 'object'}
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlow...@linaro.org>
---
Changes since v1:
1. New patch
---
arch/arm64/boot/dts/exynos/exynos7.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi
b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 82fee1b7caab..b1fa68835b09 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -690,7 +690,7 @@ usbdrd_phy: phy@15500000 {
#phy-cells = <1>;
};
- usbdrd: usb {
+ usbdrd: usb@15400000 {
compatible = "samsung,exynos7-dwusb3";
clocks = <&clock_fsys0 ACLK_USBDRD300>,
<&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
@@ -699,11 +699,11 @@ usbdrd: usb {
"usbdrd30_axius_clk";
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x0 0x15400000 0x10000>;
- usb@15400000 {
+ usb@0 {
compatible = "snps,dwc3";
- reg = <0x15400000 0x10000>;
+ reg = <0x0 0x10000>;
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
--
2.34.1
_______________________________________________
Replicant mailing list
Replicant@osuosl.org
https://lists.osuosl.org/mailman/listinfo/replicant
