Okay, the problem is fixed, and it was (in retrospect :) an obvious one.

The first thing was to upgrade to 4.3, as this allowed the Backup Server to
back up more than one machine per tape.

The *second* part was to update the firmware on the ATTO Fast/Wide/Diff card
to the current version, (1.62), as this fixed the communications problems
between Retrospect and the tape drive. So now, it scans all 18 DLT bays
perfectly, and is backing up like quite the happy camper.
There is no limit to the good you can do if you don't care who gets the
-General George C. Marshall 

To subscribe:    [EMAIL PROTECTED]
To unsubscribe:  [EMAIL PROTECTED]
Archives:        <http://list.working-dogs.com/lists/retro-talk/>
Problems?:       [EMAIL PROTECTED]

Reply via email to