Dear Stefan, thank you for your e-mail. I don't think that we have the airscatter snout installed but I have to look. I am a bit puzzled by this.
Juro On Thu, 16 Nov 2006 09:35:59 +0100 [EMAIL PROTECTED] wrote: > Dear Juro, > for our old D5000 diffractometer with secondary graphite > monochromator we > used 0.5 as pol. factor, that worked quite well. > However, we now have also a new D4 system, but with the > Vantec PSD detector > without monochromator then LP should be 0. > We have at this moment the same problem. > Do you have an airscatter snout installed on your system > to prevent > airscatter effects at low 2 theta angles? > We think that in our case this may be the reason for the > problems, because > it is possible that the airscatter snout may cut off some > intensity of the > primary beam at higher 2 theta angles. > Kind regards, > Stefan > > > Dr. Stefan Melzer > Corus RD&T > Ceramics Research Centre > PO Box 10000 > 1970CA IJmuiden > The Netherlands > T +31 (0)251 499571 > F +31 (0)251 470489 > > ********************************************************************** > This transmission is confidential and must not be used or > disclosed by > anyone other than the intended recipient. Neither Corus > Group Plc nor > any of its subsidiaries can accept any responsibility for > any use or > misuse of the transmission by anyone. > ********************************************************************** > ---------------------------------- Juraj Majzlan Institute of Mineralogy and Petrology Albert-Ludwig-University of Freiburg Albertstrasse 23b Freiburg, D-79104, Germany telephone +49-761-203-6416 fax +49-761-203-6407 http://www.minpet.uni-freiburg.de/sites/personen/majzlan.html
