I have read so many posts here, and on HydrogenAudio and Doom9, that my head is spinning. From the posts I have read, I am reasonably sure it is possible to do what I want but I cannot determine the steps to accomplish my goal.
Here is my goal and the steps I have taken to this point; - I have approximately 20 DVD-Audio discs that I want to enjoy in 5.1/24 bit/48 KHz (I have a SB Classic and a SBR, both connected to 5.1 systems via digital). I understand the Dolby Digital and DTS path but the majority of my DVD-Audio discs do not have DD or DTS tracks. - extracted a 24 bit/96 KHz/5.1 track (using DVD-Audio Explorer) to a single WAV file. - I converted this file, using dBpoweramp, to create a 24 bit/48 KHz/5.1 WAV file - tried to play this file, in pass through mode (volume set to 100% fixed), but it results in white noise from all speakers. - both the files (96 & 48 KHz) play fine on two computers using WMP11, albeit not verifying the 5.1 as there are just left and right speakers. - my SB Classic/SBR and receiver setup is correct for DTS and DD as I downloaded some files from the Internet and they play fine. - I extracted 6 mono WAV files (24 bit/96 KHz) from the DVD-Audio and then converted them to 24 bit/48 KHz. - these mono files play on a PC but only produce white noise through the SBR/SB Classic It seems to me that I need to encode the 24 bit/48 KHz/5.1 WAV file to a AC3 or DTS file then run the spdifconvert program from user smst. Before undertaking this step I thought I could get confirmation, or redirection, from someone who has done what I am trying to do. Thanks in advance for any help. -- Kiwi ------------------------------------------------------------------------ Kiwi's Profile: http://forums.slimdevices.com/member.php?userid=2169 View this thread: http://forums.slimdevices.com/showthread.php?t=61004 _______________________________________________ ripping mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/ripping
