ralphpnj;518203 Wrote: > I realize that this may require a doing a bit of work on your end but > this is how I've been handling multi-disc sets for quite some time now. > > 1) I place all of the tracks from all the discs into a single > directory, however the tracks are numbered 101, 102,...,201, > 202,...,301, 302,...etc and for sets with ten or more discs I add a > extra 0 or 1 to the front, e.g. 0101, 0201,....1001, 1101, etc. > > 2) Using mp3tag (or any other GOOD tag editor) I make sure that: > a) the track numbers are correct > b) using the "extended tags" feature verify that the "disc number" > field is blank. > c) that the "album" field is the same for all the tracks, i.e. > that "disc 1", "disc 2", etc is not present. > > If there is any information about a specific disc that I want to keep, > such as whether it's a "live" disc or for specific years, I place that > information in the "comment" field. > > Works like a charm.
I can see that that will work fine, but it really is a lot of work compared to changing the disk titles so they are identical and adding a DISCNUMBER to each one (which takes about 30 seconds in total, even on a 20-disk set) in MP3Tag). I can see the appeal of your method if you use Browse Music folder (which I never do). -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... SB Touch Beta (wired) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=75344 _______________________________________________ ripping mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/ripping
