Jeff McGinley at Axia has asked me to pass this along:

On Oct 25, 2011, at 21:54 52, Jeff McGinley wrote:

> Hi all,
> I'm not very familiar with how Rivendell handles the logic, but I don't
> anticipate any major problems that one would have using it with an iQ.
> The piece of software that we use is called Pathfinder, and that handles
> the audio and GPIO route changes. If RML mimics Pathfinder and how it
> treats the logic, then I shouldn't see any problem.
> Hope this helps,
> -Jeff
> 
> Fred Gleason <[email protected]> writes:
> On Oct 25, 2011, at 17:05 36, Guy Curtis wrote:
> 
>> Can rivendell automate switching using RML with the Axia IQ? It's a
> simple question but before we spend the cash on it just would like to
> check.
> 
> CC'ing Axia tech support on this.
> 
> Rivendell should be able to control the specifically 'Livewire' part of
> the iQ --i.e. the twelve input and four output "gateway" connections
> (discussed on pp 61-62 of the iQ manual), although this has not (yet)
> been actually tested. Such control utilizes the LiveWire Routing
> Protocol, which (as per Axia spec) should be present on all
> Livewire-enabled devices.
> 
> Axia folks: are you aware of any special situations WRT the iQ that would
> keep this from working as described?
> 
> Cheers!
> 
> 
> |-------------------------------------------------------------------------|
> | Frederick F. Gleason, Jr. | Chief Developer |
> | | Paravel Systems |
> |-------------------------------------------------------------------------|
> | Never worry about theory as long as the machinery does what it's |
> | supposed to do. |
> | -- Robert A. Heinlein |
> |-------------------------------------------------------------------------|
> 
> 
> --------------------| | Never worry about theory as long as the machinery
> does what it's | | supposed to do. | | -- Robert A. Heinlein |
> |-------------------------------------------------------------------------|
> 


_______________________________________________
Rivendell-dev mailing list
[email protected]
http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev

Reply via email to