Hello,
I am trying to use Rivendell 2.2.1 with an Audio Card as the audio router for
Satellite-delivered programming. Audio from the satellite comes into Port 1
(Channels 1, 2: L/R), and is switched in and out to play on output port 1 -
(1,2: L/R) of Rivendell. To activate the switching, I use the Local Audio Card
switcher configured for two inputs (the audio card has two pairs of In/Out).
To activate the Satellite Audio, I issue "ST 2 1 1!" as a macro cart. To stop,
I issue "SR 2 1 1!". The Local Audio Card is configured as Switching Device
#2.
When I issue ST 2 1 1 - Audio begins to pass through on channels L/R of output
1 and the Left channel of output 2 of the second pair (channels 1, 2, and 3 of
the Delta 44). Further, the audio in Channel 2 (The Right Channel of Pair 1)
is twice the level as Channel 1 and 3.
The card I am using is the Delta 44 with the envy24 driver. When I bring up
the control panel for the Envy, I can see that the incoming audio is at the
correct levels of Input Channel 1 and 2 (L/R for Pair 1). It is just
problematic on the output with this card where channel 2 is twice the level as
channel 1 and 3. Ideally, audio should only be coming out of channels 1 and 2.
Any help/recommendations are greatly appreciated.
Thanks.
Brian
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
