I wrote a script a number of years ago on another automation system to back-time the hour.
The scheduler basically filled to the :52 and a script would fire just before that point every hour. The script needed to inspect the current log/queue and decide on how to fill to the top allowing maximum 4 seconds fade into TOH. If the music were to play out and end at :52 - pick a 4-5 minute song, then pick one with the remainder of the time to total 8 minutes. (within +4 seconds accuracy padded to allow for segue). If the end time were between :55 - :00, grab two 2:30 tracks. If the end time were between :55:30 and - :58 - grab a track that times to the end. If the end time were after :58. (highly unlikely in an AC format), take an instrumental fade bed. This also had to deal with artist suppression, etc... For that, we had a very large category pull from and a randomized function where we weighted tracks based in their play frequency. With Perl or Python, this could possibly be done with Rivendell. We now allow our news to float, so that solves some of the issues. I hope this helps. Brian -- Brian P. McGlynn Sent from my iPhone On Jan 29, 2013, at 1:27 PM, Jay Eames <[email protected]> wrote: > I can give a comparison with another playout system that I have used > (Myriad), which might explain what I am personally after. > > In Myriad, if the hour is set to auto, and it has a hard timed event > scheduled, it will adjust the length of the tracks accordingly. So it might > trim 20 seconds off the end each music track to get the transition to the > hard timed event just right. It knows not to cut traffic carts, jingles, > sweepers etc - just the music. > > In automatic mode in Rivendell, as far as I can see, the music will just play > track on track with the programmed segues (if appropriate) without regard to > hitting the timed event. On hitting the hard time it will then just play the > track, so if it's only 15-20 seconds into a track it doesn't matter, it will > cut it and play the hard timed event. > > I'd love to be able to do something similar to Myriad in Rivendell in an > ideal world, but would take a way of making the transition to the news more > acceptable? I am sure there is a way to do so. > > > On 29 January 2013 18:17, Jay Ashworth <[email protected]> wrote: > Let me stick my nose in here for a bit, totally ignorant of where Rivendell > presently is on this point, and recap how I've always understood this was > supposed to be done; people who are using it every day can tell me why it > doesn't work this way. :-) > > If I schedule an hour of music, announcements, and spots, and all my music > has properly timed and carted intro and outro segue areas, then that hour > of music has some "air" in it: I don't *have to* use up all of the available > talk-over space at each end of each song, and, in a 14 song hour, that can > amount to a considerable amount of squeeze space in that hour, as much as > two minutes, I would expect. If I leave my segues loose, then I can > tighten them up when necessary to hit an outcue, spreading it over enough > songs that it's not especially noticeable. > > Is the problem that the external scheduler does not provide a way to put > in the hard time mark so you can hit it? Or is it that the adjustment > of "air" in that hour to hit the hard time is not presently something > Rivendell itself can do? (IE: is this a lack of metadata bandwidth in > the schedule data between the scheduler and Rivendell?) > > Cause this seems like it ought not to be that hard to get accomplished. > > What layer is the molasses leak in? :-) > > Cheers, > -- jra > -- > Jay R. Ashworth Baylink > [email protected] > Designer The Things I Think RFC 2100 > Ashworth & Associates http://baylink.pitas.com 2000 Land Rover DII > St Petersburg FL USA #natog +1 727 647 1274 > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev > > > > -- > There are 2 kinds of people in the world; Those who can extrapolate from > incomplete data > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
_______________________________________________ Rivendell-dev mailing list [email protected] http://lists.rivendellaudio.org/mailman/listinfo/rivendell-dev
