10.2.10.14:/var/snd on /var/snd type nfs4 (rw,realitime,vers-4.1,rsize1048576,wsize=1-48576,namelen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,clientaddr=10.2.10.15,local_lock=none,addr=10.2.10.14
The addresses are local to LAN. They were first issued by DHCP and then made into fixed addresses on the router. SND shows up as red in terminal. Edmer Archila Engineer, Studio A Media Communications and Journalism www.edmerarchila.com > On Dec 24, 2018, at 9:05 AM, Workino <[email protected]> wrote: > > Hello, > For point 2 double check the nfs export on server for directory /var/snd and > how u have mounted on client side ( mount |grep snd ) > > For point 3 check the user u are using to connect to the database what > permission have on database server. > > If I can send some log output > > Workino > > Sent from my iPhone > > On 24 Dec 2018, at 15:37, Edmer Archila <[email protected] > <mailto:[email protected]>> wrote: > >> Hi, >> >> I have a Dell R610 that I’m using as the Rivendell Server. Attached to that >> over LAN is an HP PC with an ASI 6114 Audio Card. >> >> I also have a secondary PC that is VPN from a building 15 miles away. >> >> All systems were installed with CentOS 7 and properly installed following >> the Centos/RHEL 7 sheet from the Paravel Systems website. >> >> I have multiple problems with the system (RDLibrary). I am new to Linux and >> am not sure where to start troubleshooting. >> >> 1. Audio Static - Every few seconds in the recording of an audio cut, Audio >> gets replaced completely by static. After a few seconds, I get audio back. I >> am getting this result consistently with the local machine and the remote >> machine. The server has no audio cards, but I may try recording using a >> Creative Soundblaster USB Card. >> >> 2. RDXport - While trying to get into “Edit Markers” in RDLibrary, I get the >> following error. Unable to download peak data, error was “RDXport.service >> returned an error”. Most of the terminal commands that were used and >> mentioned in previous emails on this mailing list do not apply to CentOS 7. >> This is also consistent on the local and remote client machines. The server >> is able to get the waveform ok. >> >> 3. Database Access - Read/Write/Deletion - Although the Client Machines can >> write files as well as modify into the library, I cannot delete them or get >> the Hours Remaining information at the bottom of RDLibrary window. The >> server appears to be working fine when doing all of this. >> >> I’m beginning to think there is a permissions issue, but again, I am a >> newbie to Linux. >> >> Thanks! >> Edmer Archila >> Engineer, Studio A >> Media Communications and Journalism >> >> www.edmerarchila.com <http://www.edmerarchila.com/> >> >> >> >> >> >> >> >> _______________________________________________ >> Rivendell-dev mailing list >> [email protected] >> <mailto:[email protected]> >> http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev >> <http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev>
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
