What's the status of SElinux? It needs to be disabled. On Mon, Dec 24, 2018, 11:05 AM Workino <[email protected] wrote:
> Hello, > For point 2 double check the nfs export on server for directory /var/snd > and how u have mounted on client side ( mount |grep snd ) > > For point 3 check the user u are using to connect to the database what > permission have on database server. > > If I can send some log output > > Workino > > Sent from my iPhone > > On 24 Dec 2018, at 15:37, Edmer Archila <[email protected]> > wrote: > > Hi, > > I have a Dell R610 that I’m using as the Rivendell Server. Attached to > that over LAN is an HP PC with an ASI 6114 Audio Card. > > I also have a secondary PC that is VPN from a building 15 miles away. > > All systems were installed with CentOS 7 and properly installed following > the Centos/RHEL 7 sheet from the Paravel Systems website. > > I have multiple problems with the system (RDLibrary). I am new to Linux > and am not sure where to start troubleshooting. > > 1. Audio Static - Every few seconds in the recording of an audio cut, > Audio gets replaced completely by static. After a few seconds, I get audio > back. I am getting this result consistently with the local machine and the > remote machine. The server has no audio cards, but I may try recording > using a Creative Soundblaster USB Card. > > 2. RDXport - While trying to get into “Edit Markers” in RDLibrary, I get > the following error. Unable to download peak data, error was > “RDXport.service returned an error”. Most of the terminal commands that > were used and mentioned in previous emails on this mailing list do not > apply to CentOS 7. This is also consistent on the local and remote client > machines. The server is able to get the waveform ok. > > 3. Database Access - Read/Write/Deletion - Although the Client Machines > can write files as well as modify into the library, I cannot delete them or > get the Hours Remaining information at the bottom of RDLibrary window. The > server appears to be working fine when doing all of this. > > I’m beginning to think there is a permissions issue, but again, I am a > newbie to Linux. > > Thanks! > *Edmer Archila* > Engineer, Studio A > Media Communications and Journalism > > www.edmerarchila.com > > > > > > > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev >
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
