Dear dev's,
When compiling a component that I started today I get the following error:
===== Internal error =======
Please report the following error to the orogen developers
/media/ssd/dev/tools/orogen/lib/orogen/gen/typekit.rb:689:in `build':
cannot find /base/samples/Joints in registry (Typelib::NotFound)
from /media/ssd/dev/tools/orogen/lib/orogen/gen/typekit.rb:689:in
`build'
from /media/ssd/dev/tools/orogen/lib/orogen/gen/typekit.rb:689:in
`rescue in build_type'
from /media/ssd/dev/tools/orogen/lib/orogen/gen/typekit.rb:672:in
`build_type'
from /media/ssd/dev/tools/orogen/lib/orogen/gen/typekit.rb:713:in
`rescue in find_type'
from /media/ssd/dev/tools/orogen/lib/orogen/gen/typekit.rb:710:in
`find_type'
from /media/ssd/dev/tools/orogen/lib/orogen/gen/project.rb:571:in
`rescue in find_type'
from /media/ssd/dev/tools/orogen/lib/orogen/gen/project.rb:566:in
`find_type'
from /media/ssd/dev/tools/orogen/lib/orogen/gen/project.rb:525:in
`find_interface_type'
from /media/ssd/dev/tools/orogen/lib/orogen/spec/port.rb:96:in
`initialize'
from /media/ssd/dev/tools/orogen/lib/orogen/spec/input_port.rb:8:in
`initialize'
from
/media/ssd/dev/tools/orogen/lib/orogen/spec/task_context.rb:1001:in `new'
from
/media/ssd/dev/tools/orogen/lib/orogen/spec/task_context.rb:1001:in
`input_port'
from data_handling.orogen:39
from /media/ssd/dev/tools/orogen/lib/orogen/gen/project.rb:998:in
`instance_eval'
from /media/ssd/dev/tools/orogen/lib/orogen/gen/project.rb:998:in
`block in task_context'
from /media/ssd/dev/tools/orogen/lib/orogen/gen/project.rb:1030:in
`instance_eval'
from /media/ssd/dev/tools/orogen/lib/orogen/gen/project.rb:1030:in
`external_task_context'
from /media/ssd/dev/tools/orogen/lib/orogen/gen/project.rb:995:in
`task_context'
from data_handling.orogen:24
from /media/ssd/dev/tools/orogen/lib/orogen/gen/project.rb:1345:in
`load'
from /media/ssd/dev/tools/orogen/bin/orogen:168:in `block in <main>'
from /media/ssd/dev/tools/orogen/lib/orogen/base.rb:67:in
`beautify_loading_errors'
from /media/ssd/dev/tools/orogen/bin/orogen:158:in `<main>'
One of the input ports is of the type joints samples and apparently cannot
identify it.
Additional info:
- When compiling this same component in the development computer it had no
problems. It is now that I uploaded the code to the rover and trying to
compile in the rover that it fails.
- I just run autoproj update before (in the rover) and when running amake
for this new component a lot more rock core components where compiled
(including base/types).
Kind regards,
Martin Azkarate
TEC-MMA
HE Space for ESA - European Space Agency
Space Automation and Robotics Engineer
ESTEC - European Space research and TEchnology Centre
Keplerlaan 1, 2201 AZ Noordwijk
The Netherlands
[email protected] | www.esa.int
Tel +31 71 565 3480 | Mob +31 650 625 564
This message and any attachments are intended for the use of the addressee or
addressees only.
The unauthorised disclosure, use, dissemination or copying (either in whole or
in part) of its
content is not permitted.
If you received this message in error, please notify the sender and delete it
from your system.
Emails can be altered and their integrity cannot be guaranteed by the sender.
Please consider the environment before printing this email.
_______________________________________________
Rock-dev mailing list
[email protected]
http://www.dfki.de/mailman/cgi-bin/listinfo/rock-dev
