You would do this with radius Attributes not plan details. Erik
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve J. Drenner Sent: Monday, November 08, 2004 2:08 PM To: Rodopi Forum Subject: [Rodopi] IS anyone doing? I have written to the forum lately asking some questions about how to make a certain billing plan and how to at a new fee option. With no responses form anyone. So I am going to try yet an other question, and how to get some feedback. I am running rodopi 5.4 I need to create a new attribute or Plan Detail item not sure which it would go under. Here is what I need to do, I am setting up a WIFI hotspot using a www.demarctech.com ReliawaveT RWV 802.11a/b/g Outdoor AP/Router/Hotspot Controller This unit will do Radius Authentication and IP Accounting, I have this working and works great. What I need now is to get an attribute or plan detail created to set users bandwidth TX & RX it needs to be something like: DTG-PPPoE-CBQ-TX = xx DTG-PPPoE-CBQ-RX = xx My hope is, is that someone out there is doing something like this and would share there thoughts.. Thanks ------------------------------------ Midwaynet.net / Midway Electronics Inc. Steve J. Drenner Director of Internet Service [EMAIL PROTECTED] 1250 N McKinley Ave Rensselaer IN 47978 tel: 219-866-3716 fax: 219-866-0319 mobile: 219-866-9079 www.midwaynet.net ------------------------------------ --------------------- To Leave the Rodopi mail list send a message to [EMAIL PROTECTED] with the word LEAVE as the message body. Please also visit the Rodopi FAQ at http://www.rodopi-faq.com --------------------- --------------------- To Leave the Rodopi mail list send a message to [EMAIL PROTECTED] with the word LEAVE as the message body. Please also visit the Rodopi FAQ at http://www.rodopi-faq.com ---------------------
