SO I would add something like this to the profiles.txt file in vopradius:
user Auth-Type := Local, User-Password == "password"
Framed-IP-Address = x.x.x.x,
MS-Primary-DNS-Server = x.x.x.x,
MS-Secondary-DNS-Server = x.x.x.x,
DTG-PPPoE-CBQ-TX = 4096,
DTG-PPPoE-CBQ-RX = 4096
OR is there somewhere else?
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of Erik Tijburg
Sent: Monday, November 08, 2004 2:36 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi] IS anyone doing?
First you will need to define the VSA in your Radius Dictionary file. So
that these attribute s are defined in VOP.
Then you will need to define these attributes in Rodopi. You can do this
under the Radius Attributes under the Admin interface.
Then you will need to define some different templates for each speed you
want to give out.
Then you will apply these different templates to different services plans
based on the speed you want to give out for that plan.
It is all in the documentation.
Erik
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Steve J. Drenner
Sent: Monday, November 08, 2004 2:27 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi] IS anyone doing?
Can you give me an example of how to set that up? And then how would that
pass onto radius, I am using virom Radius 4.0
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of Erik Tijburg
Sent: Monday, November 08, 2004 2:22 PM
To: [EMAIL PROTECTED]
Subject: [Rodopi] IS anyone doing?
You would do this with radius Attributes not plan details.
Erik
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Steve J. Drenner
Sent: Monday, November 08, 2004 2:08 PM
To: Rodopi Forum
Subject: [Rodopi] IS anyone doing?
I have written to the forum lately asking some questions about how to make a
certain billing plan and how to at a new fee option. With no responses form
anyone.
So I am going to try yet an other question, and how to get some feedback.
I am running rodopi 5.4
I need to create a new attribute or Plan Detail item not sure which it would
go under.
Here is what I need to do, I am setting up a WIFI hotspot using a
www.demarctech.com ReliawaveT RWV 802.11a/b/g Outdoor AP/Router/Hotspot
Controller
This unit will do Radius Authentication and IP Accounting, I have this
working and works great. What I need now is to get an attribute or plan
detail created to set users bandwidth TX & RX it needs to be something like:
DTG-PPPoE-CBQ-TX = xx
DTG-PPPoE-CBQ-RX = xx
My hope is, is that someone out there is doing something like this and would
share there thoughts..
Thanks
------------------------------------
Midwaynet.net / Midway Electronics Inc.
Steve J. Drenner
Director of Internet Service
[EMAIL PROTECTED]
1250 N McKinley Ave
Rensselaer IN 47978
tel: 219-866-3716
fax: 219-866-0319
mobile: 219-866-9079
www.midwaynet.net
------------------------------------
---------------------
To Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with the word LEAVE as the message body.
Please also visit the Rodopi FAQ at http://www.rodopi-faq.com
---------------------
---------------------
To Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with the word LEAVE as the message body.
Please also visit the Rodopi FAQ at http://www.rodopi-faq.com
---------------------
---------------------
To Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with the word LEAVE as the message body.
Please also visit the Rodopi FAQ at http://www.rodopi-faq.com
---------------------
---------------------
To Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with the word LEAVE as the message body.
Please also visit the Rodopi FAQ at http://www.rodopi-faq.com
---------------------
---------------------
To Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with the word LEAVE as the message body.
Please also visit the Rodopi FAQ at http://www.rodopi-faq.com
---------------------
