Check in the file named VPRDict.txt it's right in your vircom radius directory.
Frederic Tarasevicius Internet Information Services, Inc. http://www.i-is.com/ 810-794-4400 mailto:[EMAIL PROTECTED] Steve J. Drenner wrote: > Okay I just add an DTG-PPPoE-CBQ-TX = 4096, DTG-PPPoE-CBQ-RX = 4096 > attribute and then created a Radius Attribute template, Now where is > the dictionary file? I have not found this in radius! > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Erik Tijburg > Sent: Monday, November 08, 2004 2:59 PM > To: [EMAIL PROTECTED] > Subject: [Rodopi] IS anyone doing? > > > You can do it that way. I prefer to do it with Rodopi Radius > templates. > > > You still need to define the DTG-PPPoE-CBQ-TX & RX attributes in the > dictionary file. > > Erik > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Steve J. Drenner > Sent: Monday, November 08, 2004 2:54 PM > To: [EMAIL PROTECTED] > Subject: [Rodopi] IS anyone doing? > > SO I would add something like this to the profiles.txt file in > vopradius: > > user Auth-Type := Local, User-Password == "password" > Framed-IP-Address = x.x.x.x, > MS-Primary-DNS-Server = x.x.x.x, > MS-Secondary-DNS-Server = x.x.x.x, > DTG-PPPoE-CBQ-TX = 4096, > DTG-PPPoE-CBQ-RX = 4096 > > > > OR is there somewhere else? > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Erik Tijburg > Sent: Monday, November 08, 2004 2:36 PM > To: [EMAIL PROTECTED] > Subject: [Rodopi] IS anyone doing? > > > First you will need to define the VSA in your Radius Dictionary file. > So that these attribute s are defined in VOP. > > Then you will need to define these attributes in Rodopi. You can do > this under the Radius Attributes under the Admin interface. > > Then you will need to define some different templates for each speed > you want to give out. > > Then you will apply these different templates to different services > plans based on the speed you want to give out for that plan. > > It is all in the documentation. > > Erik > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Steve J. Drenner > Sent: Monday, November 08, 2004 2:27 PM > To: [EMAIL PROTECTED] > Subject: [Rodopi] IS anyone doing? > > Can you give me an example of how to set that up? And then how would > that pass onto radius, I am using virom Radius 4.0 > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Erik Tijburg > Sent: Monday, November 08, 2004 2:22 PM > To: [EMAIL PROTECTED] > Subject: [Rodopi] IS anyone doing? > > > You would do this with radius Attributes not plan details. > > Erik > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Steve J. Drenner > Sent: Monday, November 08, 2004 2:08 PM > To: Rodopi Forum > Subject: [Rodopi] IS anyone doing? > > I have written to the forum lately asking some questions about how to > make a certain billing plan and how to at a new fee option. With no > responses form anyone. > So I am going to try yet an other question, and how to get some > feedback. > > I am running rodopi 5.4 > I need to create a new attribute or Plan Detail item not sure which > it would go under. > > Here is what I need to do, I am setting up a WIFI hotspot using a > www.demarctech.com ReliawaveT RWV 802.11a/b/g Outdoor > AP/Router/Hotspot Controller > > This unit will do Radius Authentication and IP Accounting, I have this > working and works great. What I need now is to get an attribute or > plan detail created to set users bandwidth TX & RX it needs to be > something like: DTG-PPPoE-CBQ-TX = xx > DTG-PPPoE-CBQ-RX = xx > > > My hope is, is that someone out there is doing something like this > and would share there thoughts.. > > Thanks > ------------------------------------ > Midwaynet.net / Midway Electronics Inc. > Steve J. Drenner > Director of Internet Service > [EMAIL PROTECTED] > 1250 N McKinley Ave > Rensselaer IN 47978 > tel: 219-866-3716 > fax: 219-866-0319 > mobile: 219-866-9079 > www.midwaynet.net > ------------------------------------ > > > > > --------------------- > To Leave the Rodopi mail list send a message to > [EMAIL PROTECTED] with the word LEAVE as the message body. > > Please also visit the Rodopi FAQ at http://www.rodopi-faq.com > --------------------- > > > > > --------------------- > To Leave the Rodopi mail list send a message to > [EMAIL PROTECTED] with the word LEAVE as the message body. > > Please also visit the Rodopi FAQ at http://www.rodopi-faq.com > --------------------- > > > > > --------------------- > To Leave the Rodopi mail list send a message to > [EMAIL PROTECTED] with the word LEAVE as the message body. > > Please also visit the Rodopi FAQ at http://www.rodopi-faq.com > --------------------- > > > > > --------------------- > To Leave the Rodopi mail list send a message to > [EMAIL PROTECTED] with the word LEAVE as the message body. > > Please also visit the Rodopi FAQ at http://www.rodopi-faq.com > --------------------- > > > > > --------------------- > To Leave the Rodopi mail list send a message to > [EMAIL PROTECTED] with the word LEAVE as the message body. > > Please also visit the Rodopi FAQ at http://www.rodopi-faq.com > --------------------- > > > > > --------------------- > To Leave the Rodopi mail list send a message to > [EMAIL PROTECTED] with the word LEAVE as the message body. > > Please also visit the Rodopi FAQ at http://www.rodopi-faq.com > --------------------- > > > > > --------------------- > To Leave the Rodopi mail list send a message to > [EMAIL PROTECTED] with the word LEAVE as the message body. > > Please also visit the Rodopi FAQ at http://www.rodopi-faq.com > --------------------- --------------------- To Leave the Rodopi mail list send a message to [EMAIL PROTECTED] with the word LEAVE as the message body. Please also visit the Rodopi FAQ at http://www.rodopi-faq.com ---------------------