Salut,
poate daca nu dai ip-ul interfetei fxp0 va functiona. dupa aceea
trebuie redus mtu din cauza overhead-ului. vezi completarile (care nu
sunt periate) de jos care sunt luate de pe o masina de prin alte
parti.
On 6/20/06, Ion-Mihai IOnut Tetcu <[EMAIL PROTECTED]> wrote:
rc.conf:
gateway_enable="YES"
ifconfig_em0="inet 192.168.1.1 netmask 255.255.255.0"
ifconfig_fxp0="inet 86.35.138.67 netmask 255.255.240.0"
ifconfig_fxp0="up mtu 1492"
defaultrouter="86.35.128.1"
nu este nevoie sa pui gw-ul aici deoarece il pune ppp-ul automat.
ppp_enable="YES"
ppp_mode="ddial"
#ppp_nat="YES"
deci este NO - default
ppp_profile="romtelecom0"
firewall_enable="YES"
firewall_type="SIMPLE"
#firewall_type="OPEN"
firewall_logging="YES"
firewall_quiet="NO"
#natd_enable="YES"
natd_enable="YES"
natd_flags="-dynamic -l -f /etc/natd.conf"
#natd_interface="86.35.138.67"
#natd_flags="-l -log-denied -log-ipfw-denied -m"
# cat /etc/natd.conf
interface tun0
unregistered_only yes
same_ports yes
# cat /etc/ppp/ppp.conf
set device PPPoE:fxp0
set MTU 1492
set MRU 1492
set dial
set crtscts off
set speed sync
accept lqr
disable deflate
disable pred1
disable vjcomp
disable acfcomp
disable protocomp
set log Phase Chat LCP IPCP CCP Warning Error Alert tun command
#end default
# test:
set login
set authname XXXXXXXX
set authkey XXXXXXX
add default HISADDR
nu stiu daca toate setarile de mai sus sunt valabile/necesare pentru
adsl-ul de la rtl.
# ifconfig fxp0
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1492
inet6 fe80::290:27ff:fe12:7aae%fxp0 prefixlen 64 scopeid 0x2
ether 00:90:27:12:7a:ae
media: Ethernet autoselect (10baseT/UTP)
status: active
# ifconfig tun0
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
inet 85.149.127.69 --> 217.0.116.94 netmask 0xffffffff
Opened by PID 49657
# netstat -nr
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 217.0.116.94 UGSc 28 17210 tun0
10.10.10/23 link#1 UC 10 0 xl0
imediat dupa ridicarea ppp, fac modificarile necesare in ipfw cu
ajutorul unui script. Ipfw-ul contine mai multe reguli inainte si dupa
regula de divert.
Toate cele de mai sus sunt pe un fbsd 4.11 stable si functioneaza fara probleme.
# uptime
10:02AM up 87 days, 14 mins, 1 user, load averages: 0.00, 0.02, 0.00
Aceleasi setari le am pe mai multe 6.1. dar acolo fac nat-ul cu pf-ul.
Sper ca te ajuta la ceva, ceea ce am scris mai sus.
Numai bine,
Nicolae Arghezi
________________________________________________________
To unsubscribe send a mail to [EMAIL PROTECTED]
