On Tue, 20 Jun 2006 10:13:13 +0200 narg <[EMAIL PROTECTED]> wrote: > Salut, > > poate daca nu dai ip-ul interfetei fxp0 va functiona. dupa aceea > trebuie redus mtu din cauza overhead-ului. vezi completarile (care nu > sunt periate) de jos care sunt luate de pe o masina de prin alte > parti. > > On 6/20/06, Ion-Mihai IOnut Tetcu <[EMAIL PROTECTED]> wrote: > > > > rc.conf: > > gateway_enable="YES" > > ifconfig_em0="inet 192.168.1.1 netmask 255.255.255.0" > > ifconfig_fxp0="inet 86.35.138.67 netmask 255.255.240.0" > > ifconfig_fxp0="up mtu 1492" > > > defaultrouter="86.35.128.1" > > nu este nevoie sa pui gw-ul aici deoarece il pune ppp-ul automat.
Mda, a ramas din testele initiale, cand avea RTLC o problema si nu imi
dadea ninmic. Din fericire atat IP-ul cat si GW-ul se pastreaza de la o
sesiune la alta.
> > ppp_enable="YES"
> > ppp_mode="ddial"
> > #ppp_nat="YES"
>
> deci este NO - default
>
> > ppp_profile="romtelecom0"
> > firewall_enable="YES"
> > firewall_type="SIMPLE"
> > #firewall_type="OPEN"
> > firewall_logging="YES"
> > firewall_quiet="NO"
> > #natd_enable="YES"
>
> natd_enable="YES"
> natd_flags="-dynamic -l -f /etc/natd.conf"
Hmm sa fie lipsa lui -dynamic de vina ?
> > #natd_interface="86.35.138.67"
> > #natd_flags="-l -log-denied -log-ipfw-denied -m"
> >
> # cat /etc/natd.conf
> interface tun0
> unregistered_only yes
> same_ports yes
>
>
> # cat /etc/ppp/ppp.conf
> set device PPPoE:fxp0
> set MTU 1492
> set MRU 1492
> set dial
> set crtscts off
> set speed sync
> accept lqr
> disable deflate
> disable pred1
> disable vjcomp
> disable acfcomp
> disable protocomp
> set log Phase Chat LCP IPCP CCP Warning Error Alert tun command
> #end default
> # test:
> set login
> set authname XXXXXXXX
> set authkey XXXXXXX
> add default HISADDR
>
> nu stiu daca toate setarile de mai sus sunt valabile/necesare pentru
> adsl-ul de la rtl.
Nici eu (si nici suportul lor nu a auzit de mai mult de jumate).
> # ifconfig fxp0
> fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1492
> inet6 fe80::290:27ff:fe12:7aae%fxp0 prefixlen 64 scopeid 0x2
> ether 00:90:27:12:7a:ae
> media: Ethernet autoselect (10baseT/UTP)
> status: active
> # ifconfig tun0
> tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492
> inet 85.149.127.69 --> 217.0.116.94 netmask 0xffffffff
> Opened by PID 49657
> # netstat -nr
> Routing tables
>
> Internet:
> Destination Gateway Flags Refs Use Netif Expire
> default 217.0.116.94 UGSc 28 17210 tun0
> 10.10.10/23 link#1 UC 10 0 xl0
>
> imediat dupa ridicarea ppp, fac modificarile necesare in ipfw cu
> ajutorul unui script. Ipfw-ul contine mai multe reguli inainte si dupa
> regula de divert.
Exact ce modificari faci ? Si cum detectezi ca s-a ridicat ? Parsezi ifconfig
tun0 ?
Hmm ar trebui sa imi scriu un scriptulet a
la /usr/share/examples/ipfw/change_rules.sh in cazul in care nu merge
sa imi puna configuratia veche sa nu ma inchid afara.
> Toate cele de mai sus sunt pe un fbsd 4.11 stable si functioneaza fara
> probleme.
> # uptime
> 10:02AM up 87 days, 14 mins, 1 user, load averages: 0.00, 0.02, 0.00
>
> Aceleasi setari le am pe mai multe 6.1. dar acolo fac nat-ul cu pf-ul.
>
> Sper ca te ajuta la ceva, ceea ce am scris mai sus.
Si eu :) Mersi.
--
IOnut - Un^d^dregistered ;) FreeBSD "user"
"Intellectual Property" is nowhere near as valuable as "Intellect"
Ferengi Rule of Acquisition #214:
Never begin a negotiation on an empty stomach.
-- ST:DS9, "The Maquis, Part I"
signature.asc
Description: PGP signature
