Supporting old hardware does not mean it will consume fewer resources. The fact that you’re carefully optimizing the code, because it has to run on old hardware, means that it will consume fewer resources. And nothing in particular stops you from doing that even without supporting old hardware.
It would be wonderful indeed, but one has to draw the line somewhere. What I was proposing is to draw the line in a useful place, i.e., in a place that would have ReactOS support hardware that is actually of any interest for new setups. I gave a variation of this argument when discussing what NT version(s) ReactOS should target. Let me give a slightly updated variation today. It seems to me that this project is terribly undermanned. Today, the codebase is missing most of what makes an OS modern and useful, and at this pace, even if you target the most modern Windows OS currently in existence, the gap is going to get bigger. Targeting legacy systems is not going to do any good. Unless you only want to run on legacy systems, that is. Let’s say for the sake of argument that that is the case. How many systems have legacy hardware *and* can’t be replaced with newer systems *and* are likely to break down (i.e. non-redundant hardware or insufficient maintenance), *and* are not just getting a cloned image of whatever was installed on there before in case they do break down? Because these would be the only possible candidates for such a ReactOS. Other that 14 years old tech-savvy kids trying to resuscitate their father’s old PC and Christian youth organizations fixing old PCs for the local Community, but I doubt this is what any of you think as your target. one of the companies I work for, every year we make a list of the older computers, and we change them. Every time this happens, I try to install the latest ReactOS and to run their CRM software on there, with the hope that one day I will be able to experimentally run one of these computers with ReactOS. The last two times I tried this, it was worse than the year before. And yet, the discussion is whether to support legacy hardware. This is why I said it is, plain and simple, a waste of resources. It is. 28 years ago GEOS 2.0 was released for the C128. 22 years ago Windows 95 was released for “legacy hardware”. ReactOS is many years away from becoming usable. You do the math… Thank you for the time you took to read this. BR, Riccardo P. Bestetti From: Ros-dev [mailto:ros-dev-boun...@reactos.org] On Behalf Of Javier Agustìn Fernàndez Arroyo Sent: mercoledì 13 dicembre 2017 12:49 To: ReactOS Development List <ros-dev@reactos.org> Subject: Re: [ros-dev] Merging our x86 HALs "supporting very old hardware, which I see as a plain and simple waste of resources." I completely disagree. Supporting very old hardware means that it will consume very very fewer resources in very new hardware, too. But, speaking about the former, it would be wonderful to be able to run Windows software in such hardware. The question in this last case is, how HAL supports new CPU instructions? but that`s an off-topic question On Wed, Dec 13, 2017 at 8:24 AM, Riccardo Paolo Bestetti <riccardo.kyo...@live.it<mailto:riccardo.kyo...@live.it>> wrote: Hi David, I was talking about supporting very old hardware, which I see as a plain and simple waste of resources. There may be legacy computers running legacy software around, but you can be sure that no one is gonna redeploy these computer, especially with a different software configuration (i.e. installing ReactOS instead of Windows [2000|XP|2003] on it). Of course I leave the (very) technical discussion about how to implement HALs to you. BR. Riccardo P. Bestetti From: Ros-dev [mailto:ros-dev-boun...@reactos.org<mailto:ros-dev-boun...@reactos.org>] On Behalf Of David Quintana (gigaherz) Sent: martedì 12 dicembre 2017 22:45 To: ReactOS Development List <ros-dev@reactos.org<mailto:ros-dev@reactos.org>> Subject: Re: [ros-dev] Merging our x86 HALs I think yes, on the fact that duplicate code is already causing bugs. Now wether we want to unify everything into one megaHAL, or compile multiple HALs fom the same codebase, or merge into two medium-sized HALs, that's what the discussion is meant to be about. On 12 December 2017 at 22:00, Riccardo Paolo Bestetti <riccardo.kyo...@live.it<mailto:riccardo.kyo...@live.it>> wrote: My bi-annual IT guy peak: Is there a real need to? I think not. B.R. Riccardo P. Bestetti From: Ros-dev [mailto:ros-dev-boun...@reactos.org<mailto:ros-dev-boun...@reactos.org>] On Behalf Of Javier Agustìn Fernàndez Arroyo Sent: martedì 12 dicembre 2017 18:13 To: ReactOS Development List <ros-dev@reactos.org<mailto:ros-dev@reactos.org>> Subject: Re: [ros-dev] Merging our x86 HALs Win8 does not support old hardware as ReactOS do! El 12 dic. 2017 17:52, "Alex Ionescu" <ion...@videotron.ca<mailto:ion...@videotron.ca>> escribió: I would move to the Win8+ HAL Model -- a single HAL for APIC, ACPI with runtime support for UEFI (if present) and MP (if present). If people still want to run on a PIC VM (why???) or old computer, then we can also maintain the HAL PIC x86 for UP. Hence there would only be 2 HALs. Best regards, Alex Ionescu On Mon, Dec 11, 2017 at 1:07 AM, Colin Finck <co...@reactos.org<mailto:co...@reactos.org>> wrote: Am 11.12.2017 um 01:18 schrieb Hermès BÉLUSCA-MAÏTO:> If you basically put all the HALs into one, then you obtain bloated stuff (which remains in memory for the whole life of the OS). Example: standard HAL is 1MB vs. ACPI HAL which is few kBHave you actually checked what makes up this difference? Hint: hal/halx86/legacy/bus/pci_vendors.ids > Note that if Windows nowadays has only one hal, it's because they now support > basically only one "architecture"/platform, namely, ACPI multiprocessor (to > put it simple). It has its pros, but also a lot of cons. That doesn't mean we need to do the same. We can have one HAL for all (Pentium and newer) x86 platforms. The overhead of additional checks at boot-up is negligible. That should be a solution for 99% of the people out there. The rest may still go and trim down our HAL to their needs. But let's not pretend we can maintain multiple x86 HALs for all x86 computers out there. Do you really want to test X HALs with Y different systems? Ensure that a legacy HAL runs on a modern ACPI system? What would be the point? > Besides this, I've a question about your observation that in the APIC hal > (not ACPI) there's different implementation of HalpCalibrateStallExecution > and HalpInitializePICs / HalpInitializeLegacyPIC . Isn't it precisely because > these stuff are completely different from the standard PICs used in platforms > for which the standard HAL (and possibly the ACPI HAL) are used? Absolutely not! You need to reprogram the standard PICs also on an APIC system, and this is precisely what both functions do. Put them into a diff tool to see for yourself. The same goes for timers. Even with the introduction of ACPI Timers, Local APIC Timers, and Time-Stamp Counters, you still need a traditional one (like RTC or PIT) for calibration at system startup. Simply because the newer ones don't run at a known fixed frequency. The Legacy HAL successfully employs an algorithm based on the RTC while the APIC HAL unsuccessfully tries to use the PIT. > Actually we should, because the detection might not work (of course in our > simple case "ACPI UP/MP" vs. "Standard", it's simple, but think about other > platforms where there can be subtle differences) Tell me about a single one we cannot detect and which is worth to support. I don't recall that we ever recommended our testers to choose a different HAL at setup. > And normally it's not the setup that decides about the HAL, but the > bootloader. That defies your previous point about the setup initializing the registry depending on the HAL. If we can let the user select a Legacy HAL in the boot loader after installing with an ACPI HAL, it is also technically possible to have one HAL that encompasses both. - Colin _______________________________________________ Ros-dev mailing list Ros-dev@reactos.org<mailto:Ros-dev@reactos.org> http://www.reactos.org/mailman/listinfo/ros-dev _______________________________________________ Ros-dev mailing list Ros-dev@reactos.org<mailto:Ros-dev@reactos.org> http://www.reactos.org/mailman/listinfo/ros-dev _______________________________________________ Ros-dev mailing list Ros-dev@reactos.org<mailto:Ros-dev@reactos.org> http://www.reactos.org/mailman/listinfo/ros-dev _______________________________________________ Ros-dev mailing list Ros-dev@reactos.org<mailto:Ros-dev@reactos.org> http://www.reactos.org/mailman/listinfo/ros-dev
_______________________________________________ Ros-dev mailing list Ros-dev@reactos.org http://www.reactos.org/mailman/listinfo/ros-dev
