Thanks Louis and James;
My model (mdl and cat files) is 13M on disk. Using the top command on Rose
with no model loaded shows (SIZE/RES) 19M/10M; with my model loaded shows
59M/50M; after successful publishing of half the model 122M/113M; after
failing to publish the whole model and issuing Out of Memory Error
140M/116M.
I can only successfully publish both halves of the model separately by
exiting rose and reloading the model. This leads me to believe that there
is a memory leak somewhere.
My SA claims that one process is only allowed 67M, but he is out today.
Thanks for all your help.
Thomas Silveria
Senior Software Engineer
Lockheed Martin Tactical Systems
Naval Electronics & Surveillance Systems
25 Enterprise Center, Middletown RI 02842
Telephone 401-848-8165 Facsimile 401-849-3318
-----Original Message-----
From: James Maynard [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, November 15, 2000 7:14 PM
To: Louis F. Springer
Cc: Silveria, Tom; [EMAIL PROTECTED]
Subject: RE: (ROSE) Out of Memory
We had a similar problem simply loading a model when it got over
640M. This
was no longer evident in 2000e but our model used less memory in
2000e and
we were not hitting the limit. The problem seemed to be in the
SmartHeap
library, which is a third party memory management subsystem of rose.
When
we upgraded to Rose 2000e we also installed the circular
dependencies
patch. As I have stated our model does not ,however, get to the
magic 640M
in 2000e so I am not sure if the problem has been fixed. I would
also check
your model for hanging relationships. These are not visible in the
browser
and can only be found through the API. I would also look for
circular
dependencies, again this is best done through the API.
James Maynard
"Louis F. Springer" <[EMAIL PROTECTED]>@rational.com on 16/11/2000
07:20:05
Please respond to "Louis F. Springer" <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
To: "Silveria, Tom" <[EMAIL PROTECTED]>
cc: <[EMAIL PROTECTED]>
Subject: RE: (ROSE) Out of Memory
Is this a server or a workstation? Do you have an SA there? I'm not
an
expert on HP-UX or an SA, but you might try increasing the virtual
memory. This is done on Linux by increasing the swap space, I
believe.
I'm sure HP-UX has a similar mechanism. You might also be able to
tell
how much virtual memory you have available at the time you are
getting
the "out of memory" error with the "top" command or similar.
-----Original Message-----
From: Silveria, Tom [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, November 15, 2000 3:25 PM
To: Jordan Janis
Cc: [EMAIL PROTECTED]
Subject: RE: (ROSE) Out of Memory
I press the Tools -> Web Publisher -> Publish menu/dialog
selections.
I am using Rose 2000e on HPUX 10.2.
Thomas Silveria
Senior Software Engineer
Lockheed Martin Tactical Systems
Naval Electronics & Surveillance Systems
25 Enterprise Center, Middletown RI 02842
Telephone 401-848-8165 Facsimile 401-849-3318
-----Original Message-----
From: Jordan Janis [SMTP:[EMAIL PROTECTED]]
Sent: Wednesday, November 15, 2000 5:02 PM
To: 'Silveria, Tom'
Subject: RE: (ROSE) Out of Memory
What do you mean by "publish"?
Jordan R. Janis
Director of Product Development
Sorceron, Inc.
T: 212-620-0021
F: 212-620-7986
E: [EMAIL PROTECTED]
URL: www.sorceron.com
***************************************NOTE*****************************
****
**********
The information contained in this email message is intended
only
for
use of
the individual or entity named above. If the reader of this
message
is not
the intended recipient, or the employee or agent responsible to
deliver it
to the intended recipient, you are hereby notified that any
dissemination,
distribution or copying of this communication is strictly
prohibited. If
you have received this communication in error, please
immediately
notify us
by telephone (212-620-0021). Thank you.
************************************************************************
****
*************
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Silveria,
Tom
Sent: Wednesday, November 15, 2000 3:24 PM
To: [EMAIL PROTECTED]
Subject: (ROSE) Out of Memory
Hello Again;
While attempting to publish my model, I get an error dialog box
titled
"librwebutil.sl" indicating "Out of Memory".
Is there any way to publish a really big model?
Thank you, All:
Thomas Silveria
Senior Software Engineer
Lockheed Martin Tactical Systems
Naval Electronics & Surveillance Systems
25 Enterprise Center, Middletown RI 02842
Telephone 401-848-8165 Facsimile 401-849-3318
************************************************************************
* Rose Forum is a public venue for ideas and discussions.
* For technical support, visit http://www.rational.com/support
*
* Admin.Subscription Requests: [EMAIL PROTECTED]
* Archive of messages:
http://www.rational.com/products/rose/usergroups/rose_forum.jtmpl
* Other Requests: [EMAIL PROTECTED]
*
* To unsubscribe from the list, please send email
*
* To: [EMAIL PROTECTED]
* Subject:<BLANK>
* Body: unsubscribe rose_forum
*
************************************************************************
*
************************************************************************
* Rose Forum is a public venue for ideas and discussions.
* For technical support, visit http://www.rational.com/support
*
* Admin.Subscription Requests: [EMAIL PROTECTED]
* Archive of messages:
http://www.rational.com/products/rose/usergroups/rose_forum.jtmpl
* Other Requests: [EMAIL PROTECTED]
*
* To unsubscribe from the list, please send email
*
* To: [EMAIL PROTECTED]
* Subject:<BLANK>
* Body: unsubscribe rose_forum
*
************************************************************************
*
************************************************************************
* Rose Forum is a public venue for ideas and discussions.
* For technical support, visit http://www.rational.com/support
*
* Admin.Subscription Requests: [EMAIL PROTECTED]
* Archive of messages:
http://www.rational.com/products/rose/usergroups/rose_forum.jtmpl
* Other Requests: [EMAIL PROTECTED]
*
* To unsubscribe from the list, please send email
*
* To: [EMAIL PROTECTED]
* Subject:<BLANK>
* Body: unsubscribe rose_forum
*
*************************************************************************
---------------------------- ERG Group --------------------------
The contents of this email and any attachments are confidential
and may only be read by the intended recipient.
-----------------------------------------------------------------
************************************************************************
* Rose Forum is a public venue for ideas and discussions.
* For technical support, visit http://www.rational.com/support
*
* Admin.Subscription Requests: [EMAIL PROTECTED]
* Archive of messages:
http://www.rational.com/products/rose/usergroups/rose_forum.jtmpl
* Other Requests: [EMAIL PROTECTED]
*
* To unsubscribe from the list, please send email
*
* To: [EMAIL PROTECTED]
* Subject:<BLANK>
* Body: unsubscribe rose_forum
*
*************************************************************************
