On Saturday 07 June 2003 08:02 am, [EMAIL PROTECTED] wrote: > ./configure --with-alsa --with-jack=no --with-ladspa=no > si je comprends bien, rosegarden utilise alsa seulement, qui lui utilise > directement ma carte son.
Oui. > je n'arrive pas a comprendre ce qui ne va pas . > d�sol�, je suis nul a installer ce soft :( > j'avoue que j'ai du mal a comprendre ... > si tu peut m'aider . > j'espere que tu arrive a me lire en francais . Plus ou moins... :) > AlsaDriver::initialiseMidi - initialised MIDI subsystem > > rosegardensequencer: RosegardenSequencer - started OK Et q'est-ce qui se passe encore? Q'est-ce que c'est le probl�me? Je lis ici "MPU 401" qui me dit que tu n'as q'une "external MIDI port" Est-ce que tu as un clavier, etc. pour reproducir le son? Si non, il faut employer qqch comme FluidSynth, car tu n'as pas une "internal MIDI port" l�. Remember what we were saying about technical vocabulary? :) This stuff isn't even in my dictionary. Not to mention my French is so rusty I can't even remember how to conjugate a number of verbs I would have used here. So I'm going to switch to English and explain it again. Maybe between the two you can understand what I'm trying to say. As I read your sequencer init, it's finding your soundcard just fine, and it's setting you up with a connection to an external playback device. This is used to transmit to a MIDI keyboard, or perhaps a MIDI sound module like an SC-55 or MT-32. In order to use it, you need to have a physical connection to the hardware, and you need to have hardware on the other side of it. If you don't have any MIDI hardware, ALSA isn't going to let you play any sound by itself with that soundcard. This is the case with my SB PCI 128, for example, and this is a limitation of ALSA that has nothing to do with Rosegarden. What you've shown doesn't look like a Rosegarden configuration/installation problem at all. If I'm reading your problem correctly, the solution is to install and run FluidSynth. You will then have two playback ports available from Rosegarden, and the FluidSynth port will make noise when you send notes to it. If I'm on the right track here, and you need more detail, I'll be happy to help you get it set up. If not, I still don't understand your question. Respond in French if you want. I read better than I write. -- Michael McIntyre USDA zone 6b in SW VA, USA Silvan <[EMAIL PROTECTED]> Linux Druid ----------[ registered Linux user #243621 ]--------- http://www.geocities.com/Paris/Rue/5407/index.html ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com. _______________________________________________ Rosegarden-devel mailing list [EMAIL PROTECTED] - use the link below to unsubscribe https://lists.sourceforge.net/lists/listinfo/rosegarden-devel
