Zach Boettner wrote:
Can anyone explain a bit more the steps I need to take to resolve this issue? Matthew, what 'command' are you talking about to run from the mysql client? How do I create the sql structure required by RT? I have the database, rt3, created, but no structure in it. I'm fairly new to FreeBSD and a bit lost with this RT installation/config. It's a crash course. Thanks, Zach
I showed you a transcript of what you'ld need to type into mysql client, and
what sort of output you should expect. However, here it is spelled out:
1) You should have installed mysql server. You can tell by running
this command:
% pkg_info -Ix mysql-server
If there's no output from that command, then become root and do this:
# cd /usr/ports/databases/mysql50-server
# make install clean
2) Mysql server should be running. As root do:
# /usr/local/etc/rc.d/mysql-server status
Now, if all is well you will see something like this:
mysql is running as pid 23757.
There are two failure modes. Firstly, if you see a message
mysql is not running
then mysql is configured to start up, but isn't currently running.
In that case, just run:
# /usr/local/etc/rc.d/mysql-server start
and try the status command again. If mysql won't start, look at
the logfile in /var/db/mysql/${hostname}.err for clues. (ie.
replace ${hostname} with the hostname of your machine...)
Secondly, if you see no output at all, then mysql has not been
configured to start up at all. In that case, edit the file
/etc/rc.conf and add the following line:
mysql_enable="YES"
Then try starting mysql-server again.
3) If you have not already done so, you should set a root password
inside mysql. Without this, anyone with access to port 3306 on
your server can control your database. To set a new mysql root
password, run this command as root:
# mysqladmin password VafugOrmup
where 'VafugOrmup' is replaced by your own secret password. Make a
record of the new MySQL root password and keep it in a safe place, as
you'll need it later. For day to day use, you can set up /root/.my.cnf
so that you don't need to type in the password every time you go into
mysql client.
Simply edit the /root/.my.cnf file to have the following contents:
# cat /root/.my.cnf
[client]
user = root
password = VafugOrmup
(replacing the password with your own one). Then make that file accessible
only by root:
# chown root:wheel /root/.my.cnf
# chmod 0600 /root/.my.cnf
Now, when you run the command mysql as root, you should get to
the 'mysql>' prompt straight away. Verify that this works.
4) Note that mysql is a very complex program and has a wealth of configuration
and tuning settings which may need adjustment to give you good performance
according to your workload and the available hardware. This is a good point
to make those settings. Unfortunately, this is not something I can give you
a
potted set of directions that you can just run through because what you need
to do depends very much on what sort of hardware you have, what sort of workload
your RT installation will need to cope with and other considerations like if
you're running any other databases or if you have separate web and DB server
hardware.
There are literally thousands of web pages discussing this sort of thing, not to
mention a dozen or so text books you can refer to, but for best results, consult
a knowledgeable DBA. For testing purposes you can just proceed with the
default
settings: everything should still work, but probably not as fast as it
could do.
5) Now, we get to the RT specific bits. First, run mysql client and check if
a database has been created for RT to use.
# mysql
[...]
mysql> SHOW DATABASES ;
This should result in output like so:
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| rt3 |
+--------------------+
3 rows in set (0.00 sec)
The default database name for RT is 'rt3': it is possible to override that, but
unless you have a good reason to do so, it's best to just keep to the default.
The other two databases are used internally by MySQL.
If the database exists, see if there are any tables in it:
mysql> use rt3
mysql> SHOW TABLES ;
The output should look like this:
+-------------------------+
| Tables_in_rt3 |
+-------------------------+
| ACL |
| Attachments |
| Attributes |
| CachedGroupMembers |
| CustomFieldValues |
| CustomFields |
| GroupMembers |
| Groups |
| Links |
| ObjectCustomFieldValues |
| ObjectCustomFields |
| Principals |
| Queues |
| ScripActions |
| ScripConditions |
| Scrips |
| Templates |
| Tickets |
| Transactions |
| Users |
| sessions |
+-------------------------+
21 rows in set (0.00 sec)
Finally, check that the DB userid RT will use for day to day access to the
database has been set up:
mysql> SHOW GRANTS FOR 'rt_user'@'localhost' ;
+----------------------------------------------------------------------------------------------------------------+
| Grants for rt_u...@localhost
|
+----------------------------------------------------------------------------------------------------------------+
| GRANT USAGE ON *.* TO 'rt_user'@'localhost' IDENTIFIED BY PASSWORD *XXXXXXXXXXCENSOREDXXXXXXXXXXXXXXXXXXXXXXX' |
| GRANT SELECT, INSERT, UPDATE, DELETE, CREATE, INDEX ON `rt3`.* TO 'rt_user'@'localhost' |
+----------------------------------------------------------------------------------------------------------------+
2 rows in set (0.02 sec)
If all the above checks return sensible results, then your database is in
good
shape and you should stop here.
6) Otherwise, you need to install the RT database schema. Remember that root
password
you set up earlier? You're going to need that now. Run the following
command as
root:
# perl rt-setup-database --action init --dba root --dba-password
VafugOrmup
This will create the rt3 database, generate all the tables in it and
populate
them with the necessary initial data, plus create the 'rt_user'@'localhost'
user and set a password for it. It will prompt you for anything else it
needs.
Cheers,
Matthew
-----Original Message-----From: Matthew Seaman [mailto:[email protected]] Sent: Friday, December 25, 2009 12:34 AMTo: Zach Boettner Cc: [email protected] Subject: Re: [rt-users] rt-3.8.6 is already installed... Error code 1 Zach Boettner wrote:Ok, now when I put the PerlRequire /usr/local/bin/webmux.pl in my httpd.conf, apache fails to restart and I get the following in my apache error log file. If I comment out the PerlRequire statement apache will run and I get the BestPractical - You're almost there web page. Does the following errors indicate a problem with my mysql config or my RT_SiteConfig.pm??? [Thu Dec 24 08:23:38 2009] [notice] SIGHUP received. Attempting torestart[Thu Dec 24 08:23:38 2009] [warn] (22)Invalid argument: Failed to enablethe'htt pready' Accept Filter [Thu Dec 24 08:23:41 2009] [error] Can't use an undefined value as anARRAYrefer ence at /usr/local/lib/perl5/site_perl/5.8.9/RT/Handle.pm line 278.\nCompilation failed in require at (eval 4) line 1.\n [Thu Dec 24 08:23:41 2009] [error] Can't load Perl file: /usr/local/bin/webmux.pl for server freebsd8.bchq.local:80, exiting... [Thu Dec 24 08:23:51 2009] [error] Can't use an undefined value as anARRAYrefer ence at /usr/local/lib/perl5/site_perl/5.8.9/RT/Handle.pm line 278.\nCompilation failed in require at (eval 4) line 1.\n [Thu Dec 24 08:23:51 2009] [error] Can't load Perl file: /usr/local/bin/webmux.pl for server freebsd8.bchq.local:80, exiting... [Thu Dec 24 08:23:54 2009] [error] Can't use an undefined value as anARRAYrefer ence at /usr/local/lib/perl5/site_perl/5.8.9/RT/Handle.pm line 278.\nCompilation failed in require at (eval 4) line 1.\n [Thu Dec 24 08:23:54 2009] [error] Can't load Perl file: /usr/local/bin/webmux.pl for server freebsd8.bchq.local:80, exiting...It's blowing up in this chunk of code (in RT::Handle) -- 277 if ( $state eq 'post' ) { 278 my $create_table = $dbh->selectrow_arrayref("SHOW CREATE TABLE Tickets")->[1]; 279 unless ( $create_table =~ /(?:ENGINE|TYPE)\s*=\s*InnoDB/i ) { 280 return (0, "RT requires that all its tables be of InnoDB type. Upgrade RT tables."); 281 } 282 } which suggests that you've got database problems. Possibly that the rt database schema hasn't been installed. Try running that command from mysql client. You should get output like this: # mysql Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 63618 Server version: 5.0.84-log FreeBSD port: mysql-server-5.0.84 Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> use rt3 Reading table information for completion of table and column names You can turn off this feature to get a quicker startup with -A Database changed mysql> SHOW CREATE TABLE Tickets \G *************************** 1. row *************************** Table: Tickets Create Table: CREATE TABLE `Tickets` ( `id` int(11) NOT NULL auto_increment, `EffectiveId` int(11) NOT NULL default '0', `Queue` int(11) NOT NULL default '0', `Type` varchar(16) character set ascii default NULL, `IssueStatement` int(11) NOT NULL default '0', `Resolution` int(11) NOT NULL default '0', `Owner` int(11) NOT NULL default '0', `Subject` varchar(200) character set utf8 collate utf8_unicode_ci default '[no subject]', `InitialPriority` int(11) NOT NULL default '0', `FinalPriority` int(11) NOT NULL default '0', `Priority` int(11) NOT NULL default '0', `TimeEstimated` int(11) NOT NULL default '0', `TimeWorked` int(11) NOT NULL default '0', `Status` varchar(10) character set ascii default NULL, `TimeLeft` int(11) NOT NULL default '0', `Told` datetime default NULL, `Starts` datetime default NULL, `Started` datetime default NULL, `Due` datetime default NULL, `Resolved` datetime default NULL, `LastUpdatedBy` int(11) NOT NULL default '0', `LastUpdated` datetime default NULL, `Creator` int(11) NOT NULL default '0', `Created` datetime default NULL, `Disabled` smallint(6) NOT NULL default '0', PRIMARY KEY (`id`), KEY `Tickets1` (`Queue`,`Status`), KEY `Tickets2` (`Owner`), KEY `Tickets6` (`EffectiveId`,`Type`) ) ENGINE=InnoDB AUTO_INCREMENT=348 DEFAULT CHARSET=utf8 1 row in set (0.00 sec) Cheers, Matthew
--
Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard
Flat 3
PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate
Kent, CT11 9PW
signature.asc
Description: OpenPGP digital signature
_______________________________________________ http://lists.bestpractical.com/cgi-bin/mailman/listinfo/rt-users Community help: http://wiki.bestpractical.com Commercial support: [email protected] Discover RT's hidden secrets with RT Essentials from O'Reilly Media. Buy a copy at http://rtbook.bestpractical.com
