Dear Dave,
Thanks so much for your kind guidance. Since I am a new user of RTL, I
apologise for asking another trivial question.
According to your advice, I should prefer PCI to ISA for the RTL
application. Now, I wish to be informed whether RT Linux also has convenient
driver for PCI6035E card? Your any suggesion will be highly appreciated.
Yuhong
----- Original Message -----
From: David Schleef <[EMAIL PROTECTED]>
To: Yuhong Ren <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, February 11, 2000 2:51 AM
Subject: Re: [rtl] RTL performance
> On Thu, Feb 10, 2000 at 09:31:05PM +0800, Yuhong Ren wrote:
> > Hi, John,
> >
> > I just want to buy a National Instruments AT-MIO-16E-10 DAQ card for the
> > control of Robot, this card uses ISA bus, so you say I made a mistake to
use
> > this kind of cards? Is it better to use PCI devices?
> >
> > Yuhong
> >
>
> The US prices for the AT-MIO-16E-10 and PCI6035E are both USD795. They
> are basically identical boards, except the 6035E is 100 kS/s instead of
> 100 kS/s. Also, the AT-MIO-16E-10 doesn't have an analog output fifo,
> so it is incapable of waveform generation, if that is important to you.
>
> Add to that the inconvienence of dealing with ISA PnP hardware, and other
> ISA issues, and the decision should be easy.
>
>
>
> dave...
>
> --- [rtl] ---
> To unsubscribe:
> echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
> echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
> ----
> For more information on Real-Time Linux see:
> http://www.rtlinux.org/~rtlinux/
--- [rtl] ---
To unsubscribe:
echo "unsubscribe rtl" | mail [EMAIL PROTECTED] OR
echo "unsubscribe rtl <Your_email>" | mail [EMAIL PROTECTED]
----
For more information on Real-Time Linux see:
http://www.rtlinux.org/~rtlinux/
