[RTnet-users] Waiting for all slaves...

Fri, 03 Mar 2006 04:42:01 -0800

I have installed rtnet (latest version on SVN server, with the command "svn checkout http://svn.berlios.de/svnroot/repos/rtnet/trunk ") on slackware 9.0, kernel 2.6.10, rtai-3.3.
I' ve done make && make install and i've done mknod of /dev/rtnet as the README file says.
On this system, i have got two network adapters, Intel 10/100.
Then i've done

'ifconfig eth0 down'
'ifconfig eth1 down'
'rmmod eepro100' (network module)'

then in /usr/realtime/modules

'insmod ./rtai_hal.ko'
'insmod ./rtai_ksched.ko'
'insmod ./rtai_sem.ko'
'insmod ./rtai_rtdm.ko'

then i've modified my /usr/local/rtnet/etc/rtnet.conf with:

RT_LOOPBACK="yes"
RTCAP="no"
STAGE_2_RG=""
STAGE_2_DST=""
STAGE_2_CMDS=""
RT_DRIVER="rt_eepro100"
IPADDR="10.0.0.1"
NETMASK="255.255.255.0"
TDMA_MODE="master"
TDMA_SLAVES=" 10.0.0.2"
TDMA_CYCLE="5000"
TDMA_OFFSET="200"

when i do in /usr/local/rtnet/sbin

./rtnet start, i have

"Waiting for all slaves..."

and in

dmesg:
RTnet: unknown layer-3 protocol

when i do in /usr/local/rtnet/sbin
./rtifconfig

i have

rteth0 Medium: Ethernet Hardware address: 00:00:5B:00:8C:2F
                  IP address: 10.0.0.1 Broadcast address: 10.0.0.255
                  UP BROADCAST RUNNING MTU: 500

rtlo     Medium: Local Loopback
          IP address: 127.0.0.1
         UP LOOPBACK RUNNING MTU: 500

the command ifconfig now produces:

lo...[etc]

vnic0  Link encap:Ethernet HWaddr 00:00:5B:00:8C:2F
         inet addr: 10.0.0.1 Bcast:10.255.255.255 Mask 255.255.255.0
       [etc...]


What have i to change in rtnet.conf? is the problem there??

--
Teresa Noviello
Chiedersi Sempre:"Avro' il tempo di rifarlo?"

Reply via email to