Teresa Noviello wrote:
> I have installed rtnet (latest version on SVN server, with the command "svn
> checkout http://svn.berlios.de/svnroot/repos/rtnet/trunk ") on slackware 9.0,
> kernel 2.6.10, rtai-3.3.
> I' ve done make && make install and i've done mknod of /dev/rtnet as the
> README file says.
> On this system, i have got two network adapters, Intel 10/100.
> Then i've done
>
> 'ifconfig eth0 down'
> 'ifconfig eth1 down'
> 'rmmod eepro100' (network module)'
>
> then in /usr/realtime/modules
>
> 'insmod ./rtai_hal.ko'
> 'insmod ./rtai_ksched.ko'
> 'insmod ./rtai_sem.ko'
> 'insmod ./rtai_rtdm.ko'
>
> then i've modified my /usr/local/rtnet/etc/rtnet.conf with:
>
> RT_LOOPBACK="yes"
> RTCAP="no"
> STAGE_2_RG=""
> STAGE_2_DST=""
> STAGE_2_CMDS=""
> RT_DRIVER="rt_eepro100"
> IPADDR="10.0.0.1"
> NETMASK=" 255.255.255.0"
> TDMA_MODE="master"
> TDMA_SLAVES="10.0.0.2"
> TDMA_CYCLE="5000"
> TDMA_OFFSET="200"
>
> when i do in /usr/local/rtnet/sbin
>
> ./rtnet start, i have
>
> "Waiting for all slaves..."
>
> and in
>
> dmesg:
> RTnet: unknown layer-3 protocol
Hmm, not an isolated network for RTnet? Ok for testing, but likely not
for production purposes.
I have an hub for the links from eth0 and eth1 that links to internet.
Now that i've read this comment i've unlink from internet the hub...
It's the same...
i do not have the message "RTnet: unknown layer-3 protocol" in dmesg, but still i'm not able to configure eth1.
There is no problem (except for the isolation issue), you now have to
start the slave with an appropriate rtnet.conf file.
Jan
i'm not sure i've understood, well:
"the slave IS the eth1?".
If the slave IS not eth1, WHAT is it?
and in any case, how can i configure the slave?
I'm sorry for all these questions, but really the documentation isn't exaustive ...
Thanks
--
Teresa Noviello
Chiedersi Sempre:"Avro' il tempo di rifarlo?"
