Hi Jan Sorry for not replying sooner but I was busy with another task.
I have solved the problem and it was due to Fedora Core 5 adding the non-realtime module each time. The rtnet script is now working fine on the master and slaves. I am using RTnet 0.9.2 and would like some additional advice on another matter. I was previously using RTnet 0.8.3 and had successfully tested the system and had used the raw-packets example. I now see that in the newest version of RTnet that this example only runs under Xenomai and I am using RTAI 3.3 Vulcano release. How can I re-build my example to work on the new version of RTnet? Also the generic and RTAI examples in the new RTnet ask for a port address on both the client and server side in order to run. How do I obtain the port addresses and must rtai_lxrt be running for these examples? Once again, thanks for any and all your help. Regards Seshan Govender -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 26 May 2006 03:31 PM To: Seshan Govender Cc: rtnet-users@lists.sourceforge.net Subject: Re: [RTnet-users] RE: Problems starting RTnet Seshan Govender wrote: > Hi all > > I have a AMD Athlon 1,4 GHz machine with 786 Mb of RAM. > I am running Fedora Core 1 (kernel 2.4.22) patched with RTAI 3.0r4. > I am having difficulty starting RTnet. When I type in ./rtnet start I get a > /usr/local/rtnet/modules/rt_8139too.o : init_module: device does not exist > error. > > I have shut down the device to be used by rtnet and have confirmed that it > does have a RealTek 8139 chipset on the card. > > Any help would be greatly appreciated. What does the dmesg output contain about your failing insmod? Which RTnet version are you using? Jan ******************************************************************************************************* Disclaimer: The information contained in this communication is confidential and may be legally privileged. It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited. If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer. Denel (Pty) Ltd exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message. Denel (Pty) Ltd is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. ******************************************************************************************************* _______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
