>> I am using RTnet 0.9.2 and would like some additional advice on another >> matter. >> >> I was previously using RTnet 0.8.3 and had successfully tested the system >> and had used the raw-packets example. >> I now see that in the newest version of RTnet that this example only runs >> under Xenomai and I am using RTAI 3.3 Vulcano release.
>Side note: release 3.3 had some issue with its RTDM interface, please >upgrade at least to vulcano CVS. Thanks, for that. I downloaded the latest vulcano from CVS. >> How can I re-build my example to work on the new version of RTnet? >Port the Xenomai demo over the RTAI API. This only involves task management etc., not the rt_dev_xxx calls (RTnet invocation via RTDM). What include files do I need? I have added rtai.h, rtai_sched.h, rtdm.h, rtnet.h and rtmac.h but am getting numerous errors when I try to compile the raw-packets example. Can I still use the existing makefile from xenomai and call make raw-packets? Also the only part that requires task management is the creation and deletion of the tasks. Is this correct because I have tried implementing changes to these tasks and have had no luck thus far. Thanks for all your help. Regards Seshan Govender Software Engineer Denel Aerospace Systems ******************************************************************************************************* Disclaimer: The information contained in this communication is confidential and may be legally privileged. It is intended solely for the use of the individual or entity to whom it is addressed and others authorised to receive it. Any review, retransmission, dissemination, copying, disclosure or other use of, or taking of any action in reliance upon, this information by person or entities other then the intended recipient is prohibited. If you have received this message in error, please notify the sender immediately by e-mail, facsimile or telephone and return and/or destroy the original message and all copies from any computer. Denel (Pty) Ltd exercises no editorial control over e-mail messages originating in the organisation and does not accept any responsibility for either the contents of the message or any copyright laws that may have been violated by the person sending this message. Denel (Pty) Ltd is neither liable for the proper and complete transmission of the information contained in this communication nor any delay in its receipt. This message should not be copied or used for any purpose other than intended, nor should it be disclosed to any other person. ******************************************************************************************************* _______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
